View Full Version : PJ #367 about to become a Super PJ...thanks to JDM!
boomstick33
04-12-2009, 03:05 PM
We leave this coming Thursday nite for Jersey & to let JDM do the voodoo that they do. Super Shaker install plus Kooks headers & some other pieces. I seriously can not wait for this!!
It's on like donkey kong! :biggrin:
Bruce
04-12-2009, 03:41 PM
Exciting times ahead for you and your PJ. JDM will take very good care of your PJ and congratulations and welcome to the club of Super PJs.
Richard347
04-13-2009, 12:19 PM
You will be happy with both the product and JDM service.
Ninjak
04-13-2009, 12:29 PM
Grats ! I do not have a PJ, but I do Loooove my SS :) Its great knowing that scoop coming out of the hood is attached to something that goes WhiiiiiiiiinE !
boomstick33
04-13-2009, 08:32 PM
Exciting times ahead for you and your PJ. JDM will take very good care of your PJ and congratulations and welcome to the club of Super PJs.
After seeing how they worked on yours, there was no question at all. Jim has been helpfull all along the way so far, offering advice on what to purchase & what not to bother with. Grade A in my book!
tonylop33
04-14-2009, 12:33 AM
You lucky dog. I am envious. JDM needs a West Coast location!
TPSMak
04-22-2009, 02:17 AM
You lucky dog. I am envious. JDM needs a West Coast location!
They do have a partner on the West Coast :biggrin:
JimIII@JDM
04-23-2009, 01:05 PM
They do have a partner on the West Coast :biggrin:
Very true! if any of you left coasters need some speed Mike and the guys at TPS are the ones to do it! We work very close with them and helped turn out a couple of cool Saleen cars already!
JimIII@JDM
04-23-2009, 01:15 PM
Mikes car should be done today! ill have some pics and a video soon. It will be on our this week at JDM video too!
Jim's video.<object width="445" height="364">
<embed src="http://www.youtube.com/v/DfEJ-s8mgos&hl=en&fs=1&color1=0xe1600f&color2=0xfebd01&border=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="445" height="364"></object>
pacettr
04-27-2009, 02:41 AM
Dyno results and a tune, please...:biggrin:
JimIII@JDM
04-27-2009, 01:40 PM
Dyno results and a tune, please...:biggrin:
510 RWHP
464 RWTQ
10.5 PSI Boost
And your tune is almost ready, we wanted to check Mike's car on the dyno with some revisions we made and it went perfect!!:biggrin:
boomstick33
04-29-2009, 11:09 PM
510 RWHP
464 RWTQ
10.5 PSI Boost
And your tune is almost ready, we wanted to check Mike's car on the dyno with some revisions we made and it went perfect!!:biggrin:
Jim...THANK YOU!!! The car runs like mad! Not a real high pitched whine on the super shaker, which is good....still has that deep rumble. You can hear the whine at higher RPM's, but it's not bad at all at low RPM's. The minute you hit the throttle the car just explodes. I can't recommend JDM high enough...top notch work!! If you're wanting your PJ worked on, go no further.
muzzy
04-30-2009, 12:11 AM
Nice car...... Love the video
muzzy
JimIII@JDM
04-30-2009, 09:29 AM
Jim...THANK YOU!!! The car runs like mad! Not a real high pitched whine on the super shaker, which is good....still has that deep rumble. You can hear the whine at higher RPM's, but it's not bad at all at low RPM's. The minute you hit the throttle the car just explodes. I can't recommend JDM high enough...top notch work!! If you're wanting your PJ worked on, go no further.
Believe it or not we are barely spinning that Saleen Supercharger! Thats why its got a subtle sound to it right now. With a 3.00 pulley or even a 2.87 they really sing!! Your car could take one of those but it may be wise to run race fuel. The first Super PJ we did #452, Frank Lussier's car made over 540 RWHP with some VP race fuel MS103 in the tank mixxed about 50/50 with 93 octane. This is just for protection as we were creeping up on the limits of the mass air sensor and wanted the make sure we had some protection incase we did reach its maximum voltage readings.
This is if the car isn't enough right now! Im sure the car is a blast to drive, i really love the way your car finished up here with everything that was done. We took alot of pride in the work and i think it shows!
JimIII