The Saleen Forums at soec.org

The Saleen Forums at soec.org (https://saleenforums.soec.org/index.php)
-   1999-2004 Saleen Mustang (https://saleenforums.soec.org/forumdisplay.php?f=62)
-   -   Q: Series V Supercharger? (https://saleenforums.soec.org/showthread.php?t=21946)

plumabob 05-16-2018 07:22 AM

Q: Series V Supercharger?
 
Anyone have a source for one of these? They were used on the Extreme.

Dave 05-20-2018 03:48 PM

The Series V was a Lysholm 2300, no?

99v6red 05-20-2018 10:16 PM

https://www.ebay.com/itm/JONSE-Speed...MAAOSwNRdX~iZe

plumabob 05-21-2018 09:09 AM

Well aware of the jonse. Just forged the motor got a 55mm pulley and she screams. Built my own heat shield so at 9psi she's good for 431 to the wheels. Not looking to spend big bucks just to upgrade my existing series 2. Builder said I'm good to 18psi.



But my sincere thanks


Bob

DarkStallion 05-22-2018 12:05 AM

series V
 
If your builder says your 2V is good for 18PSI, yeah go with a 2300. I don't even think my engine is good for 18PSI. Now the question is where are you going to find a series V that is pulled off of an actual E. Tough find if you find one. Maybe those folks have a used one. They are always doing R&D maybe they have one that they can let go for a good deal. I think they are worth a buzz.

99v6red 05-22-2018 01:00 AM

call them and get the base plate, bov, plenum, snout and core. its your only option. I had two of the extreme take offs and sold them both for 4k+ only 74 original kits out there.....


All times are GMT -4. The time now is 10:11 PM.