|
Register | FAQ | Members List | Calendar | Mark Forums Read |
1998-2001 XP For the XP6 & XP8 Ford Explorer-based models. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Q: Powerdyne Idler pulley part number? - XP8
Ok, my idler pulley has some serious play in it and is making some noise (the one by the power steering pump), so I want to replace it. On a stock 5.0 this is a smooth large pulley. On the XP8, it's a 6 rib grooved pulley. From reading the install manual, it appears that the original is swapped for this metal grooved pulley.
Anybody happen to have a part #? My fall back is to just take it off and see if the local parts stores can match up the size. Thanks!
__________________
Todd |
#2
|
||||
|
||||
I took the pulley off and just took it to Napa. It is not a generic pulley size, but the Gates 38008 (70mm) is about 2mm smaller than what's there and was the closest we could come up with.
It went on just fine and I was still able to get the belt tightened down, so we're all good.
__________________
Todd |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|