The Saleen Forums at soec.org header image

Go Back   The Saleen Forums at soec.org > Saleen Mustang Discussions > 1984-1993 Saleen Mustang
Register FAQ Members List Calendar Mark Forums Read

1984-1993 Saleen Mustang For the Fox platform Saleen Mustang. Be sure to specify year, model and equipment if asking for help.

Reply
 
Thread Tools Display Modes
  #1  
Old 12-19-2015
NJSALEEN NJSALEEN is offline
Saleen Forums Participant
 
Join Date: Jun 2006
Location: NJ
Posts: 40
Default Q: Stern 17" Center Bore Diameter?

Q: Purchased a set of 17" Stern 3 piece wheels with 66.1 hub bore.
What is the correct size I need to have these centers machined to fit a Fox Saleen? Is it 70.0 exact?
I am just too lazy to remove the front wheel to measure the front rotor hub.
Please send help.
__________________
87#178 Grey Hatch
87#219 Black Hatch
88#09 Ranger Sportruck Blue (1of1)
89#579 RACEPAINT Hatch (1of4)
89#25 SSC (Official/unnoficial 25th anniv.)
90#194 Red Hatch (Stuck in Europe W/4k)
96#125 S281 Tangerine Speedster (1of2)
98#02 XP8 White AWD
Reply With Quote
  #2  
Old 12-19-2015
Dave's Avatar
Dave Dave is offline
Administrator
 
Join Date: Feb 2006
Location: soec.org
Posts: 11,310
Default

This thread my help:
http://saleenforums.soec.org/showthread.php?t=18478
__________________

David - Aiding The Addicted™
Join SOEC on Facebook * Follow SOEC on Instagram
Reply With Quote
  #3  
Old 12-19-2015
Dagenham Dagenham is offline
Senior Saleen Forums Participant
 
Join Date: Oct 2015
Location: Duncannon PA
Posts: 194
Default

I have asset of stock rotors laying around. If I remember, I'll measure the hub size for you.
__________________
85-132
Oxford white
Blue stripes
Tan interior
Reply With Quote
  #4  
Old 12-19-2015
Dagenham Dagenham is offline
Senior Saleen Forums Participant
 
Join Date: Oct 2015
Location: Duncannon PA
Posts: 194
Default

I put '03-'04 Mach 1 wheels on my stock svo rotors and the centers wereto small on the wheels by thousandths of an inch. I removed the rotor and the studs from the rotor and used a soft disc grinder around the rotor hub and basically shaved A very minimal amount off to make them fit right.
You may be able to do the same thing.
__________________
85-132
Oxford white
Blue stripes
Tan interior
Reply With Quote
  #5  
Old 12-21-2015
Dagenham Dagenham is offline
Senior Saleen Forums Participant
 
Join Date: Oct 2015
Location: Duncannon PA
Posts: 194
Default

I measured a stock '91 5.0 rotor at 63mm.
Hope this helps.
__________________
85-132
Oxford white
Blue stripes
Tan interior
Reply With Quote
  #6  
Old 12-24-2015
SA10#04 SA10#04 is offline
SOEC Member
 
Join Date: Oct 2008
Location: East TN
Posts: 94
Default

Quote:
Originally Posted by Dagenham View Post
I measured a stock '91 5.0 rotor at 63mm.
Hope this helps.
The 4 lug rotor has a smaller snout. The 5 lug rotor has a larger hub. It's just shy of 70mm. 69.6 I believe. Quoting from memory there though. Most Ford OE wheels are 70.3-70.6mm hub bore. I've bored out the Stern's to 73mm so that there are no issues. Most of the Stern's I've owned with the hub's the correct size from Hinodex (Stern's parent company) were 72-73mm.
__________________
SA10 #4 Chassis
www.almost4.com
Reply With Quote
  #7  
Old 12-24-2015
87 vert's Avatar
87 vert 87 vert is offline
SOEC Member
 
Join Date: Nov 2009
Location: Tiny's garage
Posts: 548
Default

The guru has spoken. I would take the previous posters word s gospel. I have bought and sold and still own a few sets of sterns. Never without talking with him first. Merry Christmas Bob and all!
__________________
Storing sweet black rides in wsm members garages all across the USA!

93,95,and those 97's!
Reply With Quote
  #8  
Old 12-27-2015
NJSALEEN NJSALEEN is offline
Saleen Forums Participant
 
Join Date: Jun 2006
Location: NJ
Posts: 40
Default

Appreciate the info.
Thanks to all for the input.
Opening hubs to 73.
__________________
87#178 Grey Hatch
87#219 Black Hatch
88#09 Ranger Sportruck Blue (1of1)
89#579 RACEPAINT Hatch (1of4)
89#25 SSC (Official/unnoficial 25th anniv.)
90#194 Red Hatch (Stuck in Europe W/4k)
96#125 S281 Tangerine Speedster (1of2)
98#02 XP8 White AWD
Reply With Quote
  #9  
Old 04-14-2017
OxfordS281 OxfordS281 is offline
Senior Saleen Forums Participant
 
Join Date: Jun 2010
Location: Maryland
Posts: 2,265
Default

Quote:
Originally Posted by SA10#04 View Post
The 4 lug rotor has a smaller snout. The 5 lug rotor has a larger hub. It's just shy of 70mm. 69.6 I believe. Quoting from memory there though. Most Ford OE wheels are 70.3-70.6mm hub bore. I've bored out the Stern's to 73mm so that there are no issues. Most of the Stern's I've owned with the hub's the correct size from Hinodex (Stern's parent company) were 72-73mm.
Will a 77mm hub bore work on the 87-93 Saleen?
__________________
1996 #222 1 of 21 in Moonlight Blue 1 of 8 with exact options

3:55's F-Leather 2 Point Chassis Brace

1999 #259 3:08's Chrome wheels, Supercharged, Floormats.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 10:09 AM.




Orders placed through these advertiser links help to support SOEC and this website.

Tire Rack Wheel Clearance

When you buy one Valeo® ULTIMATE™ Wiper Blade from Tire Rack, you'll get one free!

Dunlop $50 Rebate


| SOEC.ORG | ABOUT SOEC | MEMBERSHIP | MERCHANDISE | LITERATURE | VEHICLE PRODUCTION | SALEEN LOCATING SERVICE | SALEEN AUTOMOTIVE | CONTACT SOEC | SOEC @ FACEBOOK |


All Original Content Copyright © 1991-2017 Saleen Owners and Enthusiasts Club, LLC (SOEC). All Rights Reserved.
SOEC is the official independent, non-profit organization for owners and enthusiasts of vehicles by Steve Saleen and Saleen Automotive, Inc.