|
Register | FAQ | Members List | Calendar | Mark Forums Read |
2005-2009 Saleen Mustang For all S281, S302, H281 and H302 models based on the Ford S-197 Mustang platform, with the exception of the S302 PJ (see below). Be sure to specify year, model and equipment if asking for help. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Seeking shop: Series VI supercharger service
Hello all. I'm new to the site. I was wondering if anyone new of anyone in the St. Louis area worth a **** that can service the series vi supercharger. Change oil, make sure it's functioning properly etc.
Thanks for any suggestions. |
#2
|
|||
|
|||
If you want to drive it to Springfield IL area I can pass you the wrenches and show you how to check to oil. If you want to change the oil you better bring a sleeping bag because it requires a little more work.
|
#3
|
|||
|
|||
Well I was hoping to find someone local. The shop its at now wants to pull the blower. Which I understand is the best way. But I'm not that confident in them. All they know is what I have told them to research. I'm not sure it needs to be changed. I recently purchased the car. I don't know how many miles are on the blower. But the car has 57,000mi.
|
#4
|
|||
|
|||
They recommend rebuilding the supercharger at around 40-50k miles. Jason at 281 Motorsports can help you out with it but you can expect the car to be out of commision for awhile since you have to ship the supercharger out to California. If the shop is not giving you confidence in their ability I would definately take it somewhere else. You might also try Justin at JMB performance in Festus MO. His number is 314-540-1541. I don't know if he has any experience with Saleen's or not but he has worked on just about everything and is very knowledgable and skilled. Tell him Jason from Springfield sent you and if he has questions he can call me.
|
#5
|
|||
|
|||
Thanks Jason. I will give him a call. Much appreciated!
|
#6
|
||||
|
||||
If we can be of help, give us a call. We do a complete overhaul on the supercharger which is much needed at 40k miles. We also make a dipstick kit so you can monitor the oil level.
__________________
Jason | 281 Motorsports NO PM'S - PLEASE CALL | 714-575-1505 1996 Cobra Vortech SC / Track prepped 2015 Coyote Powered F-150 Check out our facility promo video here: http://bit.ly/1yHNfxM Email: 281motorsports@gmail.com Web: www.ProSpeedMustang.com Facebook: www.facebook.com/mustangperformance Youtube: http://bit.ly/1zOxanf "Doing the job right...is the ONLY option we offer!" |
#7
|
|||
|
|||
How much is the dipstick kit? Is it easy to install? Or do I have to remove the upper portion and crossover pipe?
|
#8
|
||||
|
||||
They are $85. You have to remove the alt and the water crossover. It should take you 1.5 hours if the blower is on the car...but worth finally being able to check your oil level in under a min.
__________________
Jason | 281 Motorsports NO PM'S - PLEASE CALL | 714-575-1505 1996 Cobra Vortech SC / Track prepped 2015 Coyote Powered F-150 Check out our facility promo video here: http://bit.ly/1yHNfxM Email: 281motorsports@gmail.com Web: www.ProSpeedMustang.com Facebook: www.facebook.com/mustangperformance Youtube: http://bit.ly/1zOxanf "Doing the job right...is the ONLY option we offer!" |
#9
|
|||
|
|||
Thanks Jason. I just called and ordered a little bit ago. Do you have any recommendations for anyone to tune the car in the St. Louis area? I had the other shop go ahead and install the new x4 tuner. But lost considerable horse power. Had a Delta Force on it before and nobody around here had even heard of it. Lost about 60rwhp.
|
#10
|
||||
|
||||
Quote:
__________________
Jason | 281 Motorsports NO PM'S - PLEASE CALL | 714-575-1505 1996 Cobra Vortech SC / Track prepped 2015 Coyote Powered F-150 Check out our facility promo video here: http://bit.ly/1yHNfxM Email: 281motorsports@gmail.com Web: www.ProSpeedMustang.com Facebook: www.facebook.com/mustangperformance Youtube: http://bit.ly/1zOxanf "Doing the job right...is the ONLY option we offer!" |
#11
|
|||
|
|||
Thanks. I'll call and ask for you tomorrow.
|
#12
|
||||
|
||||
Did my team get you squared away?
__________________
Jason | 281 Motorsports NO PM'S - PLEASE CALL | 714-575-1505 1996 Cobra Vortech SC / Track prepped 2015 Coyote Powered F-150 Check out our facility promo video here: http://bit.ly/1yHNfxM Email: 281motorsports@gmail.com Web: www.ProSpeedMustang.com Facebook: www.facebook.com/mustangperformance Youtube: http://bit.ly/1zOxanf "Doing the job right...is the ONLY option we offer!" |
#13
|
|||
|
|||
Sorry, I haven't had a chance to call yet. I'll try and get ahold of you after the holiday weekend. Thanks again. I did get the oil dip stick kit yesterday. hope to get it installed soon as I can find someone to do it. Not sure I wanna tackle that one myself.
|
#14
|
|||
|
|||
Did you ever find a place and if so what happened?
|
#15
|
||||
|
||||
So let me get this straight ! Both the alternator and water crossover have to be removed just in order to check the friggin oil level ? Then on top of that shell out an additional $85.00 to purchase an oil dipstick that should had been included by Saleen to begin with..
IMHO, this is totally ridiculous and unacceptable for a such a reputable company as Saleen to charge over 5-6k for these supercharger kits but yet can't even bother to include a simple dipstick for their customers so they can monitor their oil level when necessary ? If that isn't bad enough in itself, then they end up making it more difficult for the end user by requiring the removal of both the alternator and water crossover pipe just to check the **** oil level.. Sure, it should only take just one minute for someone to check their oil level, however once you factor in the removal of the alternator and water crossover pipe.. How long does that very same one minute oil level check become then ??????
__________________
Saleen series VI S/C - 39lb injectors - 3.6" pulley - Eibach pro kit springs - Borla ATAK mufflers - Pypes cut n clamp X mid-pipe to OEM cats - Firestone Firehawk Indy 500 Tires 275/40/18" square - GT500 strut mounts - Hurst short throw shifter - CFM billet oil cap breather - UPR 4 chamber catch can - Eibach camber bolts - OEM GT500 18x9.5 wheels - Koni adj sport struts/shocks - BMR poly adj panhard bar - Saleen extreme 98mm stock airbox - Autolite HT0 spark plugs - JDM 91 oct performance tune. |
#16
|
|||
|
|||
Considering that the supercharger was designed to conservatively not need an oil change for 50K miles I don't think the design is that outrageous. If you look at all of the engineering work that went into building their own design of supercharger I think they did a really good job.
__________________
2005 Dodge Ram SRT-10 QC 2006 Dodge Ram SRT-10 RC 2006-1296 Ford Mustang Saleen SC281 2004-013 Ford Mustang Salween Extreme-FOR SALE 1999 Ford Mustang Cobra convertible SA-20 clone 2006 Dodge Charger R/T 2007 Jeep Grand Cherokee SRT8-SOLD 2002 Big Dog Pitbull-SOLD 2005-1343 Ford Mustang Saleen SC281. Barricade replica-SOLD 2011 Ram Express 2006-016 Ford Mustang Saleen Extreme-FOR SALE 2012 Ford F150 FX2 2007-300 Ford Mustang Saleen SC281-FOR SALE 2005 Ram SRT-10 RC CE #43-FOR SALE |
#17
|
||||
|
||||
From my understanding, the actual manufacturer is technically a Lysholm based 2.3L Twin Screw supercharger that was licensed to Saleen, unless of course Lysholm was just the parts manufacturer ?
And although the supercharger doesn't require an oil change for 50k miles.. That wasn't my point, my point is, the end user should be able to have easy access when checking their oil level when required.. Just as a car's engine doesn't require an oil change for 3-5k miles or every 3 months, the oil levels still require being monitored, as oil viscosity breaks down over time.. I'm also fully aware that supercharger oil doesn't break down to the extent of what a car's internal combustion engine does, however were still talking about moving parts such as the supercharger's internal gears, rotors ect. that still require oil and will eventually break down and require monitoring never the less.. Therefore, one shouldn't be required to have to remove their alternator, water crossover when it comes to just making certain their oil levels remain safe !
__________________
Saleen series VI S/C - 39lb injectors - 3.6" pulley - Eibach pro kit springs - Borla ATAK mufflers - Pypes cut n clamp X mid-pipe to OEM cats - Firestone Firehawk Indy 500 Tires 275/40/18" square - GT500 strut mounts - Hurst short throw shifter - CFM billet oil cap breather - UPR 4 chamber catch can - Eibach camber bolts - OEM GT500 18x9.5 wheels - Koni adj sport struts/shocks - BMR poly adj panhard bar - Saleen extreme 98mm stock airbox - Autolite HT0 spark plugs - JDM 91 oct performance tune. |
#18
|
||||
|
||||
You can check the oil level without removing the crossover.
|
#19
|
||||
|
||||
You are correct the internals of the blower are from Lysholm who was bought out by Vortech. I had an issue with my SC and Vortech sent me to PSE superchargers who Vortech stated was the only authorized facility for repair.
PSE installed a site class to check the oil level. I use an inspection tube camera to view the oil level. This takes about a minute to line up the camera with the site glass and works very well. When cold the site glass is at half full and at hot is at the very top of the glass. If you have any question call Vortech at 805 247 0226 and ask for Ernie.
__________________
|
#20
|
|||
|
|||
Series VI supercharger service pictures and ideas?
This is on my 2007 S281 SC with 12,200 miles. After reading multiple threads and hearing various stories I've not actually found any thread successfully showing directions to checking, adding or changing the fluid themselves without removing additional items in the engine? Even the Saleen directions are not much help from what I have seen. Maybe I'm missing something, but if I can find a 1/4 ratchet, long ext, and swivel head that fits through the small opening on top it seems that you'll be able to get access to the Allen head without removing anything else other than the front air box arm to help you view the area. I've posted a few pictures of my findings. Has anyone tried this before? The only concern I would have is breaking the Allen bolt free from the factory. Maybe soaking it with some PB Blaster and be careful to not get any inside the supercharger would help? I've also noticed that they make 45 degree Allen wrenches which may do the trick if you can get enough leverage on them.
Once it's free you can take a syringe and fish tank tubing to work with the fluids. So I would be curious as to those who have successfully done this on their own with no issues. Also would like to know if anyone installed the S281 Motorsports dip stick on their own and can post pictures of what it looks like. Does it come through the top and if so did you have to remove any other parts to install it? Unfortunately my 2007 has the blue gasket too as I can see it on the sides, so I would not be surprised if it's leaking too thus the urgency to checking it. |
#21
|
||||
|
||||
Open this link and scroll to the bottom of the thread. This may help you.
http://saleenforums.soec.org/showthread.php?t=3158
__________________
|
#22
|
||||
|
||||
I fastened a piece in the plug. I just take off the alternator and turn it out with a 1/4 wrench, I have a small ratchet that works too.
|
#23
|
||||
|
||||
Would you mind walking me through what steps to take ?
__________________
Saleen series VI S/C - 39lb injectors - 3.6" pulley - Eibach pro kit springs - Borla ATAK mufflers - Pypes cut n clamp X mid-pipe to OEM cats - Firestone Firehawk Indy 500 Tires 275/40/18" square - GT500 strut mounts - Hurst short throw shifter - CFM billet oil cap breather - UPR 4 chamber catch can - Eibach camber bolts - OEM GT500 18x9.5 wheels - Koni adj sport struts/shocks - BMR poly adj panhard bar - Saleen extreme 98mm stock airbox - Autolite HT0 spark plugs - JDM 91 oct performance tune. |
#24
|
|||
|
|||
No. I haven't in stalled it yet. I haven't found a shop in town I feel comfortable with. It's just sitting on my toolbox. I don't know what I am going to do. either get a new '15 or might trailer it up to Brenspeed if I keep it.
|
#25
|
|||
|
|||
What size is that Allen head before you added the attachment?
|
#26
|
|||
|
|||
I wonder how tight this thing is from the factory? Even with the alternator removed you still don't have much room from left to right.
|
#27
|
||||
|
||||
Quote:
It's also my understanding that JDM, Brenspeed and 281 motorsports also repair our Saleen blowers as well..
__________________
Saleen series VI S/C - 39lb injectors - 3.6" pulley - Eibach pro kit springs - Borla ATAK mufflers - Pypes cut n clamp X mid-pipe to OEM cats - Firestone Firehawk Indy 500 Tires 275/40/18" square - GT500 strut mounts - Hurst short throw shifter - CFM billet oil cap breather - UPR 4 chamber catch can - Eibach camber bolts - OEM GT500 18x9.5 wheels - Koni adj sport struts/shocks - BMR poly adj panhard bar - Saleen extreme 98mm stock airbox - Autolite HT0 spark plugs - JDM 91 oct performance tune. |
#28
|
|||
|
|||
Found the oil BTW that came with the supercharger.
|
#29
|
||||
|
||||
Quote:
Totally useless as far as I'm concerned !
__________________
Saleen series VI S/C - 39lb injectors - 3.6" pulley - Eibach pro kit springs - Borla ATAK mufflers - Pypes cut n clamp X mid-pipe to OEM cats - Firestone Firehawk Indy 500 Tires 275/40/18" square - GT500 strut mounts - Hurst short throw shifter - CFM billet oil cap breather - UPR 4 chamber catch can - Eibach camber bolts - OEM GT500 18x9.5 wheels - Koni adj sport struts/shocks - BMR poly adj panhard bar - Saleen extreme 98mm stock airbox - Autolite HT0 spark plugs - JDM 91 oct performance tune. |
#30
|
|||
|
|||
Quote:
|
#31
|
||||
|
||||
Once it's cracked loose you can actually get your fingers on either side of the fitting and spin it out. After doing it a few times the process takes me about 15 minutes now
|
#32
|
|||
|
|||
I'm going to give it a try. I don't think it's difficult, just a very tight space. Would rather not have to remove alt, so we'll see. I also have a local performance shop I might visit if I cannot break the bolt free, but the rest I would rather do and learn. They will charge 1 hour labor to check, however I don't think they're fully aware of the space issues and we very well may be far ahead of them with the knowledge from others on this thread.
|
#33
|
|||
|
|||
That's awesome, thank you. It sure would suck to drop that thing in the engine compartment or under the supercharger and not be able to find it...
|
#34
|
|||
|
|||
BTW. Nice color Saleen! Mine is the same, Redfire. 07-341.
|
#35
|
||||
|
||||
Quote:
Installing our dipstick kit is quite simple and should only take 1.5 hours with basic hand tools. We include a very detailed instruction manual to install our kit and we always have staff on hand to answer any questions. As to the blower design, there were good and bad things in the design. The LONG runner length makes great power, but is sacrafised by putting the drive assembly down in the valley of the motor where it gets warm. Good and bad, we've made a ton of power with them and will continue to appreciate them!
__________________
Jason | 281 Motorsports NO PM'S - PLEASE CALL | 714-575-1505 1996 Cobra Vortech SC / Track prepped 2015 Coyote Powered F-150 Check out our facility promo video here: http://bit.ly/1yHNfxM Email: 281motorsports@gmail.com Web: www.ProSpeedMustang.com Facebook: www.facebook.com/mustangperformance Youtube: http://bit.ly/1zOxanf "Doing the job right...is the ONLY option we offer!" |
#36
|
||||
|
||||
By the way, we sell the supercharger oil as well in a pre-measured out bottle for $29.99....pour and go. Our dipstick kits come with a 1oz. bottle to top off the supercharger if needbe.
__________________
Jason | 281 Motorsports NO PM'S - PLEASE CALL | 714-575-1505 1996 Cobra Vortech SC / Track prepped 2015 Coyote Powered F-150 Check out our facility promo video here: http://bit.ly/1yHNfxM Email: 281motorsports@gmail.com Web: www.ProSpeedMustang.com Facebook: www.facebook.com/mustangperformance Youtube: http://bit.ly/1zOxanf "Doing the job right...is the ONLY option we offer!" |
#37
|
||||
|
||||
I should of added. You can see the rags I pack around the area. That's just in case i drop it. The plug is brass, the peice I put in the plug is metal so now I spin it out with my magnetic pick up tool in there so there's no chance of dropping it.
|
#38
|
||||
|
||||
The internal parts such as the rotors were from Lysholm. The Saleen blower is a Lysholm unit in a Saleen manifold. PSE superchargers bought out the entire inventory of the parts from Lysholm. PSE will not sell these parts to customers or vendors. Call PSE or Vortech and validate, I did.
__________________
|
#39
|
||||
|
||||
Saleen has plenty of stock on Saleen internal parts, we buy from them. The parts we can obtain that offer updated/better parts we source on our own.
__________________
Jason | 281 Motorsports NO PM'S - PLEASE CALL | 714-575-1505 1996 Cobra Vortech SC / Track prepped 2015 Coyote Powered F-150 Check out our facility promo video here: http://bit.ly/1yHNfxM Email: 281motorsports@gmail.com Web: www.ProSpeedMustang.com Facebook: www.facebook.com/mustangperformance Youtube: http://bit.ly/1zOxanf "Doing the job right...is the ONLY option we offer!" |
#40
|
|||
|
|||
Quote:
http://www.brenspeed.com/saleenoil.html |
#41
|
||||
|
||||
Quote:
Side note: if your needed to add or change oil, you need to service the supercharger. The system doesnt "consume" oil, and if your leaking oil and have ran anything below 8oz of oil, the nose bearings and drive assembly should be checked for damaged or more damage can occur. If your at 40k miles, a thourough service should be done. Keep in mind, please discard the unused portion after approx 6 months after being opened. It has been recomended to us that is not advised to be used at that point. *****As a Holiday Promotion, we will include a FREE Dipstick kit ($85 value plus shipping), and a "Saleen Coil Pack Decal Kit" ($29.99 value) for any Supercharger Services conducted in December / January. This offer is good for SOEC Paid members only.
__________________
Jason | 281 Motorsports NO PM'S - PLEASE CALL | 714-575-1505 1996 Cobra Vortech SC / Track prepped 2015 Coyote Powered F-150 Check out our facility promo video here: http://bit.ly/1yHNfxM Email: 281motorsports@gmail.com Web: www.ProSpeedMustang.com Facebook: www.facebook.com/mustangperformance Youtube: http://bit.ly/1zOxanf "Doing the job right...is the ONLY option we offer!" Last edited by Jason @ 281m; 12-02-2014 at 03:06 PM. |
#42
|
||||
|
||||
Quote:
Why would your shop be referred to by Brenspeed when it comes to rebuilding the Saleen units, being as they also repair and rebuild them at their own facilities ? I also disagree with your statement about claiming to be the only shop that is authorized by Saleen and used by Saleen to rebuild their superchargers, as this is clearly not accurate.. The fact is.. Brenspeed has been an authorized Saleen service center and distributor for years.. In addition, if any of their customers purchased their Saleen S/C kits and then installed by Brenspeed ? The customer would also retain the 3 year/36,000 mile warranty from Ford.. JDM engineering has also been an authorized Saleen service center for years as well and continue to be to this day.. JDM btw: also worked directly with Saleen and did the actual tuning for the Saleen extreme and ultimate calibrations.. As for the blower design.. How are they making such great power if that same power is being sacrificed by putting the drive assembly down in the valley of the engine where it gets hot ? This also seems to be contradictory as well.. As I'm sure you're fully aware that colder/denser air creates power and that heat destroys it.. The bottom line is this.. I'll be the first to admit that I am far from being an expert when it comes to mechanical engineering, however I do have enough common sense to know that if something doesn't make logical sense.. Then I'm going to question and dispute it
__________________
Saleen series VI S/C - 39lb injectors - 3.6" pulley - Eibach pro kit springs - Borla ATAK mufflers - Pypes cut n clamp X mid-pipe to OEM cats - Firestone Firehawk Indy 500 Tires 275/40/18" square - GT500 strut mounts - Hurst short throw shifter - CFM billet oil cap breather - UPR 4 chamber catch can - Eibach camber bolts - OEM GT500 18x9.5 wheels - Koni adj sport struts/shocks - BMR poly adj panhard bar - Saleen extreme 98mm stock airbox - Autolite HT0 spark plugs - JDM 91 oct performance tune. |
#43
|
|||
|
|||
Quote:
Thanks for the info. Rick |
#44
|
||||
|
||||
We only use PSE Superchargers to repair or rebuild our Saleen Series VI units. They are the only Lyscholm dealer in the US that carries the parts necessary to do so. I have not tried to obtain anything from Saleen in recent years because they are barely a shell of what they used to be in aftermarket parts and service. There are very precise tolerances and clearances in these superchargers that have to be followed when assembled so I wouldn't trust any one other than a professional. PSE is the only shop we trust or will use.
We were the first Speedlab center Saleen authorized to do warranty work or any work for that matter on the 2005+ Mustangs other than Ford Dealerships. Brenspeed and Stage 3 followed suit. In recent years with out parts available to service and no help direct from Saleen we stopped considering ourselves a Saleen speedlab facility because the title really holds no value. Our name and reputation has been built over the years for building some of the fastest and best S197 Saleen Supercharged Mustangs on the planet! Our tuning, parts, and service are surpassed by no one! The Seal in the front nose cone often goes on these Series VI units, I have seen superchargers with just over 2,000 miles and some with over 100,000 miles. There is no rhyme or reason as to why but I will tell you this, I believe it is all in the original assembly of the supercharger. I saw how and where these blowers were assembled. In a small, dark room, by one gentleman who built the units with mere hand tools. Look at other Supercharger manufactures they have Clean rooms and machines that assembled the units and measure and test them before ever being put on a car. Roush and Eaton joined forces some years back and the facility they put together is mind blowing. I have never seen a failure with an Eaton product like I have with these Saleen built Lyscholm units. Rob Simons who currently works for Edelbrock and has designed their entire E-force Supercharger line up originally designed the Series VI Saleen Supercharger. The Blower housing was his design, the internals and parts used to build it were provided by Lyscholm. So it is a Saleen Supercharger Housing with Lyscholm internals if you want to get technical. PSE is the only Licensed dealer and repair facility in the US for Lyscholm, Eaton, and a number of other companies. Ed, the owner is a Supercharger Wiz Genius. I always enjoy talking with him because he is like a made scientist, always explaining things in perfect detail and not one to walk away from a challenge or to try and design something better. Check out this TWIN Supercharged Lightning he built years ago. https://www.youtube.com/watch?v=DMdiqK68iOg Ed is a true engineer and will not molest your supercharger, but turn it into a work of art! JimIII |
#45
|
|||||||
|
|||||||
Here you go...please see below.
Quote:
Quote:
Quote:
To clairify, if you purchased a Saleen from a Ford Dealership with an originally equipped supercharger, your engine/supercharger warranty became 1yr/12,000 miles and was honored through Saleen. This had some variance due to State laws. Quote:
Quote:
Quote:
Quote:
I hope my anwsers clear up any confussion.
__________________
Jason | 281 Motorsports NO PM'S - PLEASE CALL | 714-575-1505 1996 Cobra Vortech SC / Track prepped 2015 Coyote Powered F-150 Check out our facility promo video here: http://bit.ly/1yHNfxM Email: 281motorsports@gmail.com Web: www.ProSpeedMustang.com Facebook: www.facebook.com/mustangperformance Youtube: http://bit.ly/1zOxanf "Doing the job right...is the ONLY option we offer!" |
#46
|
||||
|
||||
Rick,
Thanks for the call, I hope I have helped explain things. Quote:
__________________
Jason | 281 Motorsports NO PM'S - PLEASE CALL | 714-575-1505 1996 Cobra Vortech SC / Track prepped 2015 Coyote Powered F-150 Check out our facility promo video here: http://bit.ly/1yHNfxM Email: 281motorsports@gmail.com Web: www.ProSpeedMustang.com Facebook: www.facebook.com/mustangperformance Youtube: http://bit.ly/1zOxanf "Doing the job right...is the ONLY option we offer!" |
#47
|
|||
|
|||
Quote:
And there you have it. There's nobody in the country that I would trust more than JDM when it comes to service, parts, advice or direction with one of these cars. They've been there done that. All fact no BS. |
#48
|
||||
|
||||
Quote:
And second, you completely misunderstood or took what I posted in the wrong way.. As I said, that if a customer of Brenspeed purchased a Saleen VI S/C in addition to having it installed by them.. That it would not void their Ford factory 3 year/36,000 mile warranty.. Just as if a customer were to purchase a brand new Saleen 281 Extreme or 281S/C directly from a Saleen authorized dealer.. The Ford factory 3 year/36,000 mile warranty remains intact.. Also, you have my apologies if you feel my post was being just a bit too aggressive, as that clearly was not my intention, however as i said, if I feel that something doesn't seem to make any logical sense nor quite add up ? I both question and dispute it and at times, I do have a tendency of coming off as being very cautious and suspicious without even realizing it.. And btw: You and I have spoken on the phone before.. 3 times as a matter of fact, which was why I made the decision to purchase the Saleen airbox lid and hard plastic inlet tube from you to begin with.. We also discussed in lengthy detail what my cold start issues were related to as well, which we both agreed upon were calibration related.. I'll give you another hint.. Think of the name Bullwinkle, along with Western, PA.. And that should re-fresh your memory as to who I am
__________________
Saleen series VI S/C - 39lb injectors - 3.6" pulley - Eibach pro kit springs - Borla ATAK mufflers - Pypes cut n clamp X mid-pipe to OEM cats - Firestone Firehawk Indy 500 Tires 275/40/18" square - GT500 strut mounts - Hurst short throw shifter - CFM billet oil cap breather - UPR 4 chamber catch can - Eibach camber bolts - OEM GT500 18x9.5 wheels - Koni adj sport struts/shocks - BMR poly adj panhard bar - Saleen extreme 98mm stock airbox - Autolite HT0 spark plugs - JDM 91 oct performance tune. |
#49
|
||||
|
||||
Quote:
I cannot speak to how coverage was handled on the F150 Harley Davidson SC trucks Saleen produced for FMC. As a side note, most S197 Mustangs are out of warranty and the Saleen Series VI is out-of-production. |
#50
|
||||
|
||||
Quote:
Somebody had to honor those warranties ! And I'm also fully aware of the fact Dave about the Saleen series VI supercharger along with all their speedlab parts being out of production for quite sometime now..
__________________
Saleen series VI S/C - 39lb injectors - 3.6" pulley - Eibach pro kit springs - Borla ATAK mufflers - Pypes cut n clamp X mid-pipe to OEM cats - Firestone Firehawk Indy 500 Tires 275/40/18" square - GT500 strut mounts - Hurst short throw shifter - CFM billet oil cap breather - UPR 4 chamber catch can - Eibach camber bolts - OEM GT500 18x9.5 wheels - Koni adj sport struts/shocks - BMR poly adj panhard bar - Saleen extreme 98mm stock airbox - Autolite HT0 spark plugs - JDM 91 oct performance tune. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|