|
Register | FAQ | Members List | Calendar | Mark Forums Read |
1994-1998 Saleen Mustang For the SN-95 platform. Be sure to specify year, model and equipment if asking for help. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
What have you done to your SN-95 Saleen today?
I've seen a thread like this on many other forums and figured why not start one on here?
So what have you done to your 94-98 Saleen today? Please share! I'll start. Today I received my authentic Saleen decal kit I ordered off of eBay. It came with the correct windshield banner (mine currently has the 99-04 banner) and the chevrons/s a l e e n decals for each door. Now I'm just on the hunt for some s281 decals for the hood. My plan is to only replace the windshield banner and save the other decals for when my current ones begin to peel off. |
#2
|
||||
|
||||
I just bought the same thing for my 98 restoration. I got the S281 decals from the same guy. Stoked to get them. Hope they still work as they are NOS.
|
#3
|
|||
|
|||
Sweet! Yea I couldn't find the s281 decals. I'll have to give Saleen a call. I plan on calling today to get a letter of authenticity and the original window sticker as well.
|
#4
|
|||
|
|||
Received my letter of authenticity today and the original window sticker!
|
#5
|
||||
|
||||
I got my injectors rebuilt/clean and put everything back together including period correct spark plug wires. Hoping to fire it up this weekend, had a dead battery and emissions are due in april!
__________________
1996 #222 1 of 21 in Moonlight Blue 1 of 8 with exact options 3:55's F-Leather 2 Point Chassis Brace 2000 #944 Performance Red 3:08's Chrome wheels, Supercharged, Floormats. 2002 #48 Mineral Gray Extreme |
#6
|
|||
|
|||
Awesome! I'd like to have my injectors cleaned. Well actually I'll probably be upgrading to 42 lb injectors soon when I do some fuel upgrades for my vortech.
|
#7
|
|||
|
|||
Today I decided to quickly polish the chrome Lemans wheels on my Saleen. Nothing super detailed, just wanted to clean them up. I could tell this hasn't been done in years. I was actually very surprised with how easily I was able to clean them. They are good for now but in the near future I plan on removing them and cleaning/polishing the backs real well also. Here's some pics.
Before: After: I noticed a few things about my wheels while cleaning them. 1.) The rear wheels appear to be the "USA Lemans". They have no "Saleen" stamping any where on the outer lip. 2.) The rear wheels also have a different offset (lug nuts are a bit deeper). Not sure what that's about. 3.) One of the front wheels appears to be the "Chinese Lemans". It has only "Saleen" stamped on the outer lip. The quality of this wheel seems to be lower than the others. (Chrome is chipping in the back) 4.) The other front wheel appears to be the "Italian Speedline Lemans". This wheel has "Saleen" as well as "Speedline" stamped into the outer lip. The "Saleen" appears to be rubbing off. I was able to classify the wheels based on the information here: http://www.saleenclubofamerica.com/SCOATech/94-98.htm |
#8
|
||||
|
||||
Quote:
__________________
1996 #222 1 of 21 in Moonlight Blue 1 of 8 with exact options 3:55's F-Leather 2 Point Chassis Brace 2000 #944 Performance Red 3:08's Chrome wheels, Supercharged, Floormats. 2002 #48 Mineral Gray Extreme |
#9
|
|||
|
|||
Quote:
|
#10
|
|||
|
|||
I recently added the SCCA Manufactures Champion decal to the passenger side quarter window of my Saleen.
online photo sharing After looking at some pictures of Saleens, I am wondering if one should go on the other side as well? Or was there only one? Anyone know? Thanks. |
#11
|
|||
|
|||
I wish those went inside the window.
__________________
1994 Mustang Faleen aka Carbon Copy D1 supercharger and Water/Methanol Injected 849rwhp and 752rwtq SAE |
#12
|
|||
|
|||
Yea. It makes it look funny.
|
#13
|
|||
|
|||
Looking for some help. Anyone know what kind of center caps I need for the wheels I posted a few posts up? Id like to replace all of my center caps but have a few different types of LeMans wheels. I have the USA LeMans in the rear, a Chinese LeMans wheel on the front passenger, and a Speedline LeMans on the front driver. Are these all different types of center caps? I have center caps that I found in the trunk of the car. Not sure if they're real Saleen caps or if they are even the right ones. I remember trying to put one of the caps on one of the rear USA LeMans and me and my dad basically had to hammer it in. This lead me to believe the are not the correct caps. Heres a pic of the caps I have:
|
#14
|
||||
|
||||
Quote:
Also those are 99-04 center caps
__________________
1996 #222 1 of 21 in Moonlight Blue 1 of 8 with exact options 3:55's F-Leather 2 Point Chassis Brace 2000 #944 Performance Red 3:08's Chrome wheels, Supercharged, Floormats. 2002 #48 Mineral Gray Extreme |
#15
|
|||
|
|||
Cool. Thanks for the info man!
|
#16
|
||||
|
||||
Removed the stock bumper bar and foam in favor of a Donathen Racing bumper bar. Ordered Sunday should be here this weekend.
__________________
1996 #222 1 of 21 in Moonlight Blue 1 of 8 with exact options 3:55's F-Leather 2 Point Chassis Brace 2000 #944 Performance Red 3:08's Chrome wheels, Supercharged, Floormats. 2002 #48 Mineral Gray Extreme |
#17
|
|||
|
|||
Be careful that bar isn't DOT approved and will offer no protection in a 10mph collision.
__________________
1994 Mustang Faleen aka Carbon Copy D1 supercharger and Water/Methanol Injected 849rwhp and 752rwtq SAE |
#18
|
||||
|
||||
I'll do my best to be cautious especially with a passenger. It doesn't see bad weather, probably won't go down the 1/4 for a while if at all. I normally just drive it to shows or on the weekends just to keep things moving. My old bumper support had a section cut to allow more air to the intercooler. I saw someone with this unit and liked it. hopefully I don't experience any fender benders or run off the road into a tree to telephone.
__________________
1996 #222 1 of 21 in Moonlight Blue 1 of 8 with exact options 3:55's F-Leather 2 Point Chassis Brace 2000 #944 Performance Red 3:08's Chrome wheels, Supercharged, Floormats. 2002 #48 Mineral Gray Extreme |
#19
|
|||
|
|||
I have a close friend that runs the same bar because he was trying to get more air to his intercooler and radiator. He said it did help in that respect. I thought about it for the exact same reason as you guys but I do a lot of daily driving so I decided against it. Either way good luck with it.
__________________
1994 Mustang Faleen aka Carbon Copy D1 supercharger and Water/Methanol Injected 849rwhp and 752rwtq SAE |
#20
|
|||
|
|||
I'll play,
Replacing the headlights and adjust them Swapping back to stock clutch cable and adj firewall If I have time get the windshield banner on Search some more for stainless exhaust pieces, lucky when they hacked up the stock saleen catback/mid-pipe they left the saleen tailpipes behind the axle there. |
#21
|
|||
|
|||
This isn't really what I did today but more over the past month.
I got some parts in. I got another championship wreath decal for the quarter window, a wreath decal for the rear window, new bumper number decals, a new momo shift knob, a Canton expansion tank, Saleen S281 floor mats, an oil feed upgrade for my vortech supercharger, and new idler pulleys. Got everything finished up yesterday and washed her. Heres some pics. Some of the parts: The knob isn't exactly like the old one but its the closest I could find. I actually like it much better. SC removed. I tried to clean it up some while it was out. Also, the oil feed upgrade kit. Canton tank. This thing looks great. However, the bolt holes didn't quite line up. I had to make small brackets to get them to work. Before: After: New mats. These really set it off. I'm surprised Saleen still had these in stock. Quite pricey though. Bumper numbers replaced and relocated to correct position (lined up with the headlight and corner light split). All done! |
#22
|
||||
|
||||
Looks like a new car.
|
#23
|
||||
|
||||
Can you take a better picture of the hole cut in your hood, the cowl section?
__________________
1996 #222 1 of 21 in Moonlight Blue 1 of 8 with exact options 3:55's F-Leather 2 Point Chassis Brace 2000 #944 Performance Red 3:08's Chrome wheels, Supercharged, Floormats. 2002 #48 Mineral Gray Extreme |
#24
|
||||
|
||||
The caps with the rubber rings are the original style 1999-2000-ish caps.
Quote:
|
#25
|
||||
|
||||
That would drive me nuts to have 3 different variety of wheels on my car.
__________________
1996 #222 1 of 21 in Moonlight Blue 1 of 8 with exact options 3:55's F-Leather 2 Point Chassis Brace 2000 #944 Performance Red 3:08's Chrome wheels, Supercharged, Floormats. 2002 #48 Mineral Gray Extreme |
#26
|
|||
|
|||
Thanks Dave!
Im unsure of which hole you are talking about? |
#27
|
||||
|
||||
The rectangular hole on underside, back of the hood. Above the firewall.
|
#28
|
|||
|
|||
Quote:
https://www.mann-engineering.com/ind...ap-silver.html Then I could just buy the emblems for them off of ebay. Or is it not that easy since I have 3 different wheels? |
#29
|
|||
|
|||
Its beginning to irritate me some now that I have been looking into them. I may consider getting all the same wheels soon.
|
#30
|
||||
|
||||
I have a full set of white Italians that need refinishing. I was going to do them in silver and sell them. I piece together wheels here and there. Which style do you prefer? I must admit chrome does suite black very well.
__________________
1996 #222 1 of 21 in Moonlight Blue 1 of 8 with exact options 3:55's F-Leather 2 Point Chassis Brace 2000 #944 Performance Red 3:08's Chrome wheels, Supercharged, Floormats. 2002 #48 Mineral Gray Extreme |
#31
|
||||
|
||||
Those could fit the Speedline magnesium, maybe. Not the aluminum.
Quote:
|
#32
|
||||
|
||||
The "correct" cap is also 3 pieces and the actual Saleen logo or Emblem is placed on a insert and then that is placed onto the cap. Depending on the width that cap might fit your speedline wheels but may be too small for the usa Lemans and the Chinese.
__________________
1996 #222 1 of 21 in Moonlight Blue 1 of 8 with exact options 3:55's F-Leather 2 Point Chassis Brace 2000 #944 Performance Red 3:08's Chrome wheels, Supercharged, Floormats. 2002 #48 Mineral Gray Extreme |
#33
|
|||
|
|||
I do agree that the chrome and black go really well together. Also, I would like to keep the car original, and it came from Saleen with the chrome. So I think the chrome stays. I do think silver would maybe look good with the silver graphics.
|
#34
|
||||
|
||||
I've made a little progress. I will be having an engine rebuilt for this car but am currently saving for that, so I'm doing temporary fixes as I plan on repainting the engine bay and core support when the motor comes out. Here I was taking care of rust on the bumper support mounts.
I Some primer for now The Donathan bar installed, which I plan on having done in moonlight blue Swapped over to my alloy magnesiums as I bought them years ago but never installed. Old rough fender liner with overspray. Plan on getting new ones Removed my battery and cleaned a bit. I plan on running a truck mounted relocation. The battery tray broke and the bolt was corroded but was able to take it out Some more rust cleanup and primer. Nothing fancy but it's progress and will for now. I may either paint my condenser or buy a new unit. A/C still blows cold. Next will be sound deadening the interior and new carpet. Possibly have my Recaro trends with climate controls done in grey cloth or grey leather with a similar logo that Saleen used on their recaros. I want it to look as oem as possible as far as the logo goes.
__________________
1996 #222 1 of 21 in Moonlight Blue 1 of 8 with exact options 3:55's F-Leather 2 Point Chassis Brace 2000 #944 Performance Red 3:08's Chrome wheels, Supercharged, Floormats. 2002 #48 Mineral Gray Extreme |
#35
|
|||
|
|||
Quote:
|
#36
|
|||
|
|||
When I had my intake off I had mine cleaned/flowbenched at a place in Houston. They weren't bad, but there was about a 10% difference from low to high. I'm glad I did it, particularly since I'm boosted.
__________________
Joe Mills |
#37
|
|||
|
|||
But as far as what I'm working on....engine compartment cleanup after dooshing everything with oil when the oil filter gasket(s) let go....
__________________
Joe Mills |
#38
|
|||
|
|||
Dyno day
The goal, was driveable linear power. Not to be a HP monster, #111 is that, but to be a nice dricveable car. To start, run, and not stall a lot.
The car had been previously chipped ( no surprise) , ir was carrying an old school Superchips chip, and I'll tell you, the tune was no good. The car had no juice till about 3500 RPM, then the boost would kick in, and then the cal just fell all over itself. Felt like it wanted to go...but would not. So Dyno run one proved what I had been feeling. Hit 4K, boom, fell off. Replce origina MAF with a 90MM Lightning MAF. The tuner started adding more fuel to manage A/F ratio, it was exceedingly lean on normal runnning, and got fatter on boost, but not quite enough,...and it was not a smooth transition. Eventually added advance all over the curve, then at specific RPM's, to finish with a much more driveable product. A I finished, probably not, but it is so much better, that it can now be enjoyed, and I have the safety of knowing that the A/F ratio is now in a very safe zone, all the way up to 6K. Next, alignment.....fix the A/C. |
#39
|
|||
|
|||
|
#40
|
|||
|
|||
Picked up some cobra brakes and Baer eradispeed rotors. Need to clean them up and repaint.
|
#41
|
|||
|
|||
Quote:
Thanks Michael Plummer
__________________
1994 Mustang Faleen aka Carbon Copy D1 supercharger and Water/Methanol Injected 849rwhp and 752rwtq SAE Last edited by Michael Plummer; 06-01-2015 at 10:50 AM. |
#42
|
||||
|
||||
Quote:
__________________
1996 #222 1 of 21 in Moonlight Blue 1 of 8 with exact options 3:55's F-Leather 2 Point Chassis Brace 2000 #944 Performance Red 3:08's Chrome wheels, Supercharged, Floormats. 2002 #48 Mineral Gray Extreme |
#43
|
|||
|
|||
I apologize but I talk to a lot of people on Mustang stuff on a daily basis that I forget sometimes what I said or wrote and to whom. I have a customer that is thinking of putting that bar on his road racer with a Saleen body kit but on a 96 Cobra, we had to modify the bar a bit to fit when we installed foam around it. So was trying to get an idea if we needed to modified the bar or not.
__________________
1994 Mustang Faleen aka Carbon Copy D1 supercharger and Water/Methanol Injected 849rwhp and 752rwtq SAE Last edited by Michael Plummer; 06-01-2015 at 01:54 PM. |
#44
|
|||
|
|||
Here is mine as of Saturday
__________________
96-247 a work in progress |
#45
|
||||
|
||||
Looks like you might miss the Mustang Roundup and AquaFest this year!
|
#46
|
|||
|
|||
Supposed to have it back on Saturday I won't make Round up due to a family reunion though.
__________________
96-247 a work in progress |
#47
|
|||
|
|||
Took off the terrible sounding SLP mufflers that were welded into the stock borla catback(got a borla catback ready to go in). Thank god the tips didnt get messed with.
Refinished cobra calipers(orange, red was peeling off), have a few days off coming up and hope to have car converted to cobra brakes all around with SS hoses and the exhuast fixed. Still need to swap the stock airbox into the car and sell the BBK stuff, just have to find the stock parts. |
#48
|
||||
|
||||
|
#49
|
||||
|
||||
Having brakes refinished
__________________
1996 #222 1 of 21 in Moonlight Blue 1 of 8 with exact options 3:55's F-Leather 2 Point Chassis Brace 2000 #944 Performance Red 3:08's Chrome wheels, Supercharged, Floormats. 2002 #48 Mineral Gray Extreme |
#50
|
|||
|
|||
Finally got it back from paint and installed new struts, control arms with bushings and X2 ball joints and Steeda bumpsteer.
__________________
96-247 a work in progress |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|