|
Register | FAQ | Members List | Calendar | Mark Forums Read |
2007-2008 S331 Sportruck For discussion of the F-150 platform "Thunder." |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
How much boost should a 3.00 pulley give?
hey guys, i have a 07 f150 single cab with a saleen supercharger,..iam kind of new to the site and to owning a supercharged vehicle,..and i have a couple of questions,..I was wondering how much boost should a 3.00 pulley give you,..because i have one installed and iam only getting like 7 to 8 is tha about right? or no? Also when i go wot the boost gauge goes to 8 psi, then when i go to 2nd gear it falls to 7 psi is that normal or is there something wrong? thanks in advance
|
#2
|
|||
|
|||
Does it fall to 7 psi and climb back up to 8psi at the top of 2nd?
My 2.87 shows around... I thought 3.0 pulleys were around 10psi. Another thing you have to worry about is if your boost gauge is correct. Mine needle isn't zeroed like it should be. |
#3
|
|||
|
|||
no i go wot and goes to 7.5 to 8 then goes back to 7,..i might be loosing boost, and as far as gauges i have the original saleen gauge pod, that goes in the tray on top of the stereo. is loosing that little boost normal or should i double check something?
|
#4
|
|||
|
|||
Well I noticed mine would do it also, I thought it was because of belt slip...
I just added the mosaleen idler, and haven't been able to test it out yet. |
#5
|
|||
|
|||
well i already have that mosaleen part added to my truck and still does that,..do you all think is the idler??
|
#6
|
|||
|
|||
No It's not the idler. I wonder if it's something on how fast 1st gear winds out.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|