|
Register | FAQ | Members List | Calendar | Mark Forums Read |
2005-2009 Saleen Mustang For all S281, S302, H281 and H302 models based on the Ford S-197 Mustang platform, with the exception of the S302 PJ (see below). Be sure to specify year, model and equipment if asking for help. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2005-08 Saleen TSBs and Install Manuals
We're working to get the 2005-08 Saleen Technical Service Bulletins and Install Manuals online, but there's a lot of them.
If you need one in particular, please PM me and we'll expedite it for you. I do want to thank former Saleen Techline ace Jorge Lopez and the people at Saleen Inc. for providing these to us. Last edited by Saleen Forums Admin; 06-08-2008 at 05:47 PM. |
#2
|
|||
|
|||
2007 PJ Instrument Cluster Removal for Reprogramming
PJ Instrument Cluster Removal for Reprogramming
|
#3
|
|||
|
|||
2007 PJ Black Paint Care
2007 PJ Black Paint Care
|
#4
|
|||
|
|||
2007 PJ Watts Link TSB
2007 PJ Watts Link TSB
|
#5
|
|||
|
|||
2005-2006 Saleen S281 Brake Line Recall on 14" and 15" Brake Upgrades
2005-2006 Saleen S281 Brake Line Recall on 14" and 15" Brake Upgrades
|
#6
|
|||
|
|||
2005 Saleen S281 Supercharged Hood Bolt TSB
2005 Saleen S281 Supercharged Hood Bolt TSB
|
#7
|
|||
|
|||
2005-2008 Saleen 475 HP Upgrade Install Manual
2005-2008 Saleen 475 HP Upgrade Install Manual
Last edited by Saleen Forums Admin; 06-19-2008 at 12:05 PM. |
#8
|
|||
|
|||
2005-08 Saleen Series VI Supercharger Maintenance Manual - Mustang & F-150
2005-08 Saleen Series VI Supercharger Maintenance Manual - Mustang S281, S302 & F-150 S331
Last edited by Saleen Forums Admin; 06-19-2008 at 12:37 PM. |
#9
|
|||
|
|||
Saleen SPEEDLAB Superchargers and Boost Gauge Statement
FROM: SALEEN WARRANTY DEPARTMENT
It has come to our attention at Saleen that there is some confusion with regards to how our supercharger works and what kind of boost pressure it should create. The following information should help you and yours assist customers with any questions they may have. The first thing that has come to our attention is customers and dealerships saying, “the boost pressure gauge does not move no matter how fast I’m going.” The only time the vehicle will produce boost is when the car is under load, meaning hard acceleration in 2nd or 3rd gear. You may see boost in all gears at wide-open throttle but, the amount of boost you will see will be small (2-3 lbs. In 1st, 4th and 5th gear compared to the 5-7 lbs you may see under hard acceleration in 2nd or 3rd gear). Our Speedlab supercharger works with a by-pass valve system similar to that of a 1993 Ford T-bird Supercoupe. When the air fuel mixture enters the inlet tube (the tube that connects the throttle body to the back of the supercharger) it has two routes it can take, either directly into the manifold or into the supercharger. When it gets routed to the supercharger the car makes boost. The way it gets routed to the supercharger is based on the by-pass valve and how much vacuum the car is making. When the car makes a lot of vacuum (hard acceleration) the butterfly that directs that air fuel mixture in the inlet tube closes and sends it to the supercharger thus, creating boost. When the car is under normal driving conditions (even accelerating from a stand still to 80 mph) the butterfly in the inlet tube stays open, directing the air fuel mixture directly into the manifold thus, not making any boost. Again the car has to be at wide-open throttle to produce boost. PDF Download: Saleen SPEEDLAB Superchargers and Boost Gauge Statement Last edited by Saleen Forums Admin; 06-19-2008 at 12:52 PM. |
#10
|
|||
|
|||
2005-08 Saleen Windshield Banner
2005-08 Saleen Windshield Banner
|
#11
|
|||
|
|||
2005-06 Knocking Noise from Front End
2005-06 Knocking Noise from Front End
|
#12
|
|||
|
|||
How much boost should the Extreme be producing under the loads you suggest int the boost statement?
|
#13
|
|||
|
|||
Should be 12 lbs. Thats what mine is producing.
|
#14
|
|||
|
|||
10-12 lbs depending on throttle input.
|
#15
|
|||
|
|||
Thanks again.
|
#16
|
|||
|
|||
TSB for car seats
Any TSBs for the flap in the front of the car seats being loose?
|
#17
|
|||
|
|||
NO, but Saleen is well aware of this issue. they usually have the deler sublet the work and then reimburse the dealer.
|
#18
|
|||
|
|||
my seats are not under warranty anymore.... when they were, I took it to the dealership and they said that they couldn't do anything about it.
|
#19
|
|||
|
|||
you can take it to any local upholstery shop and they can tighten up the hog rings on the cushion.
|
#20
|
||||
|
||||
Salley Pulley Installation TSB
Hi Listers
Is there a TSB on installing Saleen underdrive pulleys. I have managed to fit crankshaft and water pump pulleys but having great difficulty in removing nut on Alternator pulley. I do have the splined tool. Tony South Australia
__________________
2008 Extreme S302E #02 RHD Saleen Demo/Press Parnelli Jones #45 Super Shaker RHD Parnelli Jones #46 Super Shaker RHD Parnelli Jones #407 Super Shaker RHD (SOLD) '06 GT Coupe "Saleen Racer" RHD 1970 GT-HO Falcon Phase 2 Owned since new 1966 Shelby GT-350 LHD 1965 TBird Conv. 429SCJ Drag Pak 4 speed |
#21
|
|||
|
|||
Quote:
I didn't even have to use the tool, because I couldn't figure out where to insert it . I held the pully with my hand, and then used an impact gun to take the nut off. You WILL need an impact gun. |
#22
|
|||
|
|||
TSB for struts
I've read a couple threads talking about an easy fix for the strut clanging, but isn't there a TSB for it?
I'd like to have more info and, if available, something more to look at (i.e. diagram, photo) in case I would be better off just fixing it myself. What would that torque spec be then? I'm not mechanically apt but did the cold-air so this is probably pretty similar. Thank you. |
#23
|
|||
|
|||
All Saleen Vehicles - Flat Spotting on Tires - STSB08-009
All Saleen Vehicles - Flat Spotting on Tires - STSB08-009 - December 1, 2008
SERVICE INFORMATION: Procedure to repair "flat spotting" on tires that have been sitting for a period of time. IF YOU CONFIRM: The vehicle has a vibration while driving. |
#24
|
|||
|
|||
Quote:
TB06-009 front end knocking noise |
#25
|
|||
|
|||
Yes, I printed that one for reference. Figured it would be same, or very similar, process for my '07. I guess there isn't a formal tsb listing '07+ vehicles then. Thanks!
|
#26
|
||||
|
||||
HID install?
__________________
07 Saleen Parnelli Jones S-302 #494 1 of 1 With Factory-Installed Scenic Roof Supershaker, 3.0 Pulley, 60# Injectors, FGT Pumps, Extreme H/E, Kooks LT's + O/R H-pipe, Spydershaft JDM Tune 89 GT Vert Too Many Mods to List
|
#27
|
|||
|
|||
|
#28
|
||||
|
||||
SuperShaker?
__________________
07 Saleen Parnelli Jones S-302 #494 1 of 1 With Factory-Installed Scenic Roof Supershaker, 3.0 Pulley, 60# Injectors, FGT Pumps, Extreme H/E, Kooks LT's + O/R H-pipe, Spydershaft JDM Tune 89 GT Vert Too Many Mods to List
|
#29
|
|||
|
|||
Where is the 475hp upgrade kit install manual that was on here a couple weeks ago? Thanks.
|
#30
|
|||
|
|||
Quote:
|
#31
|
|||
|
|||
Anyone have the installation / wiring instructions for the Heritage/PJ decklid panel and body kit. I picked up a full kit directly from Saleen and there was all the pieces, hardware kit, etc but no installation instructions.
Thanks! Last edited by Steve91386; 05-16-2009 at 04:41 AM. |
#32
|
||||
|
||||
__________________
07 Saleen Parnelli Jones S-302 #494 1 of 1 With Factory-Installed Scenic Roof Supershaker, 3.0 Pulley, 60# Injectors, FGT Pumps, Extreme H/E, Kooks LT's + O/R H-pipe, Spydershaft JDM Tune 89 GT Vert Too Many Mods to List
|
#33
|
||||
|
||||
|
#34
|
|||
|
|||
|
#35
|
|||
|
|||
|
#36
|
|||
|
|||
Thanks, the louver install guide will definitely help!
Although, similar, the S series is a little different than the Heritage series, especially when it comes to the license plate bracket installation and wiring. If you had ANY info on the install of the Heritage series components that would be a complete life saver! |
#37
|
|||
|
|||
|
#38
|
|||
|
|||
|
#39
|
|||
|
|||
Heat exchanger install please?
|
#40
|
|||
|
|||
See pages 80-81 of the 2005-09 Saleen Series VI Supercharger - 475 HP Installation Manual. It's a big download, so save it to your hard drive.
|
#41
|
|||
|
|||
Quote:
|
#42
|
|||
|
|||
Sorry about that -- it's 58MB and we had some trouble on the upload.
|
#43
|
|||
|
|||
Cool, it worked this time. Thank you!
|
#44
|
||||
|
||||
Extreme heat exchanger install?
__________________
07 Saleen Parnelli Jones S-302 #494 1 of 1 With Factory-Installed Scenic Roof Supershaker, 3.0 Pulley, 60# Injectors, FGT Pumps, Extreme H/E, Kooks LT's + O/R H-pipe, Spydershaft JDM Tune 89 GT Vert Too Many Mods to List
|
#45
|
|||
|
|||
No, replacing a friend's 'regular' H/E. Did you upgrade yours and was it helpful/worth it? |
#46
|
||||
|
||||
Quote:
I have the extreme h/e. I live in Oklahoma and it gets pretty hot. No sense taking any chances...
__________________
07 Saleen Parnelli Jones S-302 #494 1 of 1 With Factory-Installed Scenic Roof Supershaker, 3.0 Pulley, 60# Injectors, FGT Pumps, Extreme H/E, Kooks LT's + O/R H-pipe, Spydershaft JDM Tune 89 GT Vert Too Many Mods to List
|
#47
|
|||
|
|||
We're closing this thread and moving reference documents to a new section: http://saleenforums.soec.org/forumdisplay.php?f=102
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|