The Saleen Forums at soec.org

The Saleen Forums at soec.org (https://saleenforums.soec.org/index.php)
-   2007-2008 S331 Sportruck (https://saleenforums.soec.org/forumdisplay.php?f=77)
-   -   Pinion Angle help (https://saleenforums.soec.org/showthread.php?t=6453)

belgamo 11-02-2009 10:56 PM

Pinion Angle help
 
Finally getting this issue taken care of, wondering if anyone has any info on the correct angle that we should be looking at.

Would like to beable to give the guy some information. thanks

Saleen190 11-04-2009 11:59 AM

go to page 2 on this forum.....about half way down. thread title REAR END ANGLE. Still havent got mine done yet, had more important isuues to work out. let me know how it goes when you get it done.

2007SaleenS331 11-04-2009 10:45 PM

Quote:

Originally Posted by belgamo (Post 27687)
Finally getting this issue taken care of, wondering if anyone has any info on the correct angle that we should be looking at.

Would like to beable to give the guy some information. thanks

Your dealing with a 2 piece driveshaft, so you would have to measure off the front shaft and the pinion flange. I had to put a 3 degree shim to angle the pinion down to get the correct angles. I went to www.wolferacecraft.com to get a better understanding of setting the correct driveshaft angles. I got rid of my driveline vibration using this info.

dentguy 11-05-2009 09:59 AM

neg 1 to 3 degrees

belgamo 11-05-2009 11:32 PM

Thank you!! You guys are been so helpful.


All times are GMT -4. The time now is 01:58 PM.