View Single Post
  #4  
Old 08-13-2016
2007-52 2007-52 is offline
Senior Saleen Forums Participant
 
Join Date: Aug 2014
Location: Longmont, CO
Posts: 139
Default

If you keep the Saleen watts link just replace the bolts.

For the center pivot bolt and the link bars to pivot bolts I replaced them with grade 12.9 Allen bolts from www.belmetric.com. They are m14 x 2.0 x 60. Part # 14C60D122P. The center bolt has to be ground down a little to about 55mm because the diff cover hole isn't deep enough.

The link to frame bracket bolts are a little longer: m14 x 2.0 x 80, part # 14C80D122PPK.

Bel-metric offers the associated hardened washers and lock nuts too.

I'd also replace the set screws with brass tipped stainless hex socket screws. They are available from Buckley QC Fasteners 800-344-3874. They are m5 x 0.8 x 10
Reply With Quote