View Single Post
  #3  
Old 09-10-2018
saleen699 saleen699 is offline
Saleen Forums Participant
 
Join Date: Sep 2010
Location: Fort Worth
Posts: 16
Default

Quote:
Originally Posted by mosaleen View Post
While cool , open your filler cap on the intercooler revivor. know start car give it 45 seconds and see if water is flowing enough to make a froth... if so your pump is running well. There is a heat shield that goes under blower that helps and a better heat exchanger you may have to get living in Tx.
Thanks Scott! I had to replace the intercooler pump last year. We had a restriction and loosened one of the hoses underneath and voila I had froth and or the whirlpool effect in the tank accordingly. This year I had some vibration and had to replace the top supercharger pulley and used a 2.6 size. All was working until last weekend and the high temperatures coming back from a show. So I immediately checked the intercooler and it was not moving froth/whirlpool. So I checked the 20 amp fuse in the fenderwell and it was good. I was checking if you know if there is a relay in the wiring that runs in the fenderwell? I still have to test the pump further of course.
Reply With Quote