|
Register | FAQ | Members List | Calendar | Mark Forums Read |
2005-2009 Saleen Mustang For all S281, S302, H281 and H302 models based on the Ford S-197 Mustang platform, with the exception of the S302 PJ (see below). Be sure to specify year, model and equipment if asking for help. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Q: Supercharger oil check?
Besides the special oil, what other parts are needed to check the oil in a VI supercharger? Cross over gaskets etc.
|
#2
|
||||
|
||||
To check the oil level you don’t need to remove the crossover.
|
#3
|
|||
|
|||
So how do I get to the fill plug? The maintenance manual said it needs to be removed. But if there is a way to check and/or change the oil, I would be interested doing so.
|
#4
|
||||
|
||||
There’s some info in here that might help you out.
http://saleenforums.soec.org/showthr...rger+oil+level |
#5
|
||||
|
||||
Small ratchet and deft fingers to get the fill plug out. If you are careful and take your time - no need to remove the crossover. The gaskets on the crossover a rubber type are set in groves. I followed this thread and was able to do it a couple of years ago.
http://www.saleenforums.soec.org/showthread.php?t=11487 Try not to lose the plug under the s/c but an flexible extension magnet works to get it again or any other metallic thing you drop under there. |
#6
|
|||
|
|||
Thanks for the info. I was going to forward this to my mechanic. But I am thinking I might give it a try myself.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|