The Saleen Forums at soec.org header image

Go Back   The Saleen Forums at soec.org > Saleen Mustang Discussions > 1999-2004 Saleen Mustang
Register FAQ Members List Calendar Mark Forums Read

1999-2004 Saleen Mustang For the SN-95 New Edge platform. Be sure to specify year, model and equipment if asking for help.

Reply
 
Thread Tools Display Modes
  #51  
Old 01-17-2011
Coderedsaleen Coderedsaleen is offline
SOEC Member
 
Join Date: Jan 2010
Location: Virginia
Posts: 1,472
Default

Quote:
Originally Posted by OxfordS281 View Post
What gauges are in the pod? Also what gauge is on the steering column? Is the car running in the picture because two the gauges look out of sync?
That pic was taken just after I did the engine conversion. The gauges in the pod are the Saleen H2O temp and boost. They were not hooked up at the time. I have a Saleen fuel pressure gauge on the steering column, that to was not hooked up.

Thanks for noticing though, good eye!
Reply With Quote
  #52  
Old 01-17-2011
Coderedsaleen Coderedsaleen is offline
SOEC Member
 
Join Date: Jan 2010
Location: Virginia
Posts: 1,472
Default

Quote:
Originally Posted by tennesseemustangperformance View Post
Yes I did, one of the first things I noticed. Does the airbag work? How did you adapt the hex wheel to fit the spline drive of the column. I was wanting to do this to my '98. Great work!!!
Yes the airbags does work, well it is hooked up...

With a little cutting and welding it will fit. I took my old wheel and had the brass insert welded into the new one after cutting the long hex stem off. I wish I would have taken pics.
Reply With Quote
  #53  
Old 01-17-2011
OxfordS281 OxfordS281 is offline
Senior Saleen Forums Participant
 
Join Date: Jun 2010
Location: Maryland
Posts: 2,308
Default

Quote:
Originally Posted by Coderedsaleen View Post
That pic was taken just after I did the engine conversion. The gauges in the pod are the Saleen H2O temp and boost. They were not hooked up at the time. I have a Saleen fuel pressure gauge on the steering column, that to was not hooked up.

Thanks for noticing though, good eye!
sounds good was just curious, after asking if the gauges worked i was interested in which ones they were. how did you get the fuel pressure to work? did you buy one off ebay? i see them there all the time but they dont come with the pieces to make them work.
Reply With Quote
  #54  
Old 01-18-2011
Coderedsaleen Coderedsaleen is offline
SOEC Member
 
Join Date: Jan 2010
Location: Virginia
Posts: 1,472
Default

Quote:
Originally Posted by OxfordS281 View Post
sounds good was just curious, after asking if the gauges worked i was interested in which ones they were. how did you get the fuel pressure to work? did you buy one off ebay? i see them there all the time but they dont come with the pieces to make them work.
Yes I bought the fuel pressure gauge off eBay, but when I bought it, it came with a bag of stuff since the guy didn't know what went with it.

It is easy to hook up though, and you can get the parts from Autometer.
Reply With Quote
  #55  
Old 01-31-2011
03SaleenSC 03SaleenSC is offline
SOEC Member
 
Join Date: Apr 2009
Location: Long Island, NY
Posts: 490
Default

Wow you have a ton of work into that car.

Looks amazing by the way....
Reply With Quote
  #56  
Old 01-31-2011
Coderedsaleen Coderedsaleen is offline
SOEC Member
 
Join Date: Jan 2010
Location: Virginia
Posts: 1,472
Default

Quote:
Originally Posted by 03SaleenSC View Post
Wow you have a ton of work into that car.

Looks amazing by the way....
Thanks! Yeah it has been a project since day one when I ordered it from Ford.
Reply With Quote
  #57  
Old 02-01-2011
Coderedsaleen Coderedsaleen is offline
SOEC Member
 
Join Date: Jan 2010
Location: Virginia
Posts: 1,472
Default

To those that are interested in doing a 32V conversion here this is what I did and your results may very. This is not complete listing because your mods, parts and methods of installation may differ from mine.

This conversion is a 01 S/C 2V engine w/ T45 transmission to a 03 S/C 4V Cobra engine w/ T56 transmission.

1. 03 Cobra engine
2. T56 transmission
3. 03 Cobra drive shaft w/ rear flange changed
4. T56 transmission mount
5. All OEM wiring harnesses and PCM
6. Lengthen wires on certain sensors
7. FRPP injector adapters
8. Lengthen wire on transmission
9. 03 Cobra hoses for cooling w/ thermostat housing
10. Plumb the inter-cooler with existing Saleen pump and reservoir
11. 03 Cobra or GT Super Car fuel pumps.
12. Wire upgrade to the fuel pumps.
13. 03 Cobra fuel tank
14. Larger air filter
15. Change polarity on COP and lengthen wires
16. DYNO TUNE (Yes you can put a 03 Cobra tune on a 2V PCM)

This list is not complete because I am probably missing some things since it was last year when I did this.

If you have any other questions just ask I might be able to help you out.

Last edited by Coderedsaleen; 02-02-2011 at 12:14 PM.
Reply With Quote
  #58  
Old 02-01-2011
Coderedsaleen Coderedsaleen is offline
SOEC Member
 
Join Date: Jan 2010
Location: Virginia
Posts: 1,472
Default

Here is a pic of the wire upgrade I did. I wired it straight from the battery to a relay to ensure the FPDM gets a constant voltage of at least 13.5 or higher. Notice I also included another set of wires to the pumps to prevent voltage drop along the wires. Lethal Performance has a kit made up for this but you can make it yourself alot cheaper.

Oh and not pictured is the inertia switch wiring, instead of the ground going to the chassis (Blue wire on relay) it now runs though the inertia switch to ground out the pumps like OEM. On a Cobra it is wired back to the PCM with white wires.

Inside of trunk driver side:


Under passenger kick panel:


Ford Racing injector adapters (Black piece between the wire and injector).



Last edited by Coderedsaleen; 02-01-2011 at 09:04 PM.
Reply With Quote
  #59  
Old 02-01-2011
Coderedsaleen Coderedsaleen is offline
SOEC Member
 
Join Date: Jan 2010
Location: Virginia
Posts: 1,472
Default

Some one asked about my Saleen outline letters for the rear facia, here is a better pic:


Last edited by Coderedsaleen; 08-21-2011 at 12:02 PM.
Reply With Quote
  #60  
Old 02-05-2011
Coderedsaleen Coderedsaleen is offline
SOEC Member
 
Join Date: Jan 2010
Location: Virginia
Posts: 1,472
Default

Did you see that go by? Man that is one sharp car. LOL!!!!!
Reply With Quote
  #61  
Old 02-13-2011
OxfordS281 OxfordS281 is offline
Senior Saleen Forums Participant
 
Join Date: Jun 2010
Location: Maryland
Posts: 2,308
Default

Quote:
Originally Posted by Coderedsaleen View Post
Here are a couple of pics of Steve signing my car at the June 19th, 2010 Bob Bell Ford show in Glen Burnie, MD:



would love to see this in 2011! I also see you have the mach1000 system in the car! very nice i love mine.
Reply With Quote
  #62  
Old 02-13-2011
Greg Wackett Greg Wackett is offline
Inactive Account
 
Join Date: Feb 2004
Location: Haymarket, Virginia
Posts: 2,429
Default

Tim,

Will you be attending Marks open house year? We has a go cart race planned for Friday night. I will be post a more details in a couple of weeks. We are still working out some of the details.

Greg
__________________
Greg Wackett
Reply With Quote
  #63  
Old 02-13-2011
Coderedsaleen Coderedsaleen is offline
SOEC Member
 
Join Date: Jan 2010
Location: Virginia
Posts: 1,472
Default

Quote:
Originally Posted by OxfordS281 View Post
would love to see this in 2011! I also see you have the mach1000 system in the car! very nice i love mine.
See what in 2011? Yes I like my Mach1000 also (installed myself), not an option for the 2001 model.
Reply With Quote
  #64  
Old 02-13-2011
Coderedsaleen Coderedsaleen is offline
SOEC Member
 
Join Date: Jan 2010
Location: Virginia
Posts: 1,472
Default

Quote:
Originally Posted by Greg Wackett View Post
Tim,

Will you be attending Marks open house year? We has a go cart race planned for Friday night. I will be post a more details in a couple of weeks. We are still working out some of the details.

Greg
Yes I will be there at the open house. I had a great time at the last one. Do you have the date in July again? Oh nevermind I see it listed in your sig. LOL!!

Last edited by Coderedsaleen; 02-13-2011 at 11:52 PM.
Reply With Quote
  #65  
Old 02-13-2011
OxfordS281 OxfordS281 is offline
Senior Saleen Forums Participant
 
Join Date: Jun 2010
Location: Maryland
Posts: 2,308
Default

Quote:
Originally Posted by Coderedsaleen View Post
See what in 2011? Yes I like my Mach1000 also (installed myself), not an option for the 2001 model.
well done on the self install. oh id love to see all the saleens in glen burnie this year, especially if steve saleen made an apperance
Reply With Quote
  #66  
Old 02-13-2011
Coderedsaleen Coderedsaleen is offline
SOEC Member
 
Join Date: Jan 2010
Location: Virginia
Posts: 1,472
Default

Yeah if Steve shows up again I will take another ride up there to show again.
Reply With Quote
  #67  
Old 02-13-2011
Coderedsaleen Coderedsaleen is offline
SOEC Member
 
Join Date: Jan 2010
Location: Virginia
Posts: 1,472
Default

Here is my new project car and yes it has the SMS 302 decals on it. It just starts with one addition then ...


Last edited by Coderedsaleen; 08-21-2011 at 12:04 PM.
Reply With Quote
  #68  
Old 02-14-2011
Dave's Avatar
Dave Dave is offline
Administrator
 
Join Date: Feb 2006
Location: Penn
Posts: 11,852
Default

Quote:
Originally Posted by Coderedsaleen View Post
Here is my new project car and yes it has the SMS 302 decals on it. It just starts with one addition then ...
If you remove the 5.0 badges. Swap the grill and taillight panels, you'd have something really close to the new SMS 302 White Label. A new model at or under 40K.
Attached Thumbnails
302WL_003.jpg  


Last edited by Dave; 02-14-2011 at 08:22 AM. Reason: Image
Reply With Quote
  #69  
Old 02-14-2011
Greg Wackett Greg Wackett is offline
Inactive Account
 
Join Date: Feb 2004
Location: Haymarket, Virginia
Posts: 2,429
Default

Quote:
Originally Posted by Coderedsaleen View Post
Yes I will be there at the open house. I had a great time at the last one. Do you have the date in July again? Oh nevermind I see it listed in your sig. LOL!!
2011 Events not to miss
-Performance Autosport open house July 9th 2011
__________________
Greg Wackett
Reply With Quote
  #70  
Old 02-14-2011
Greg Wackett Greg Wackett is offline
Inactive Account
 
Join Date: Feb 2004
Location: Haymarket, Virginia
Posts: 2,429
Default

Quote:
Originally Posted by OxfordS281 View Post
well done on the self install. oh id love to see all the saleens in glen burnie this year, especially if steve saleen made an apperance
Keep an eye on the site Jim will post updates on where Steve will be over the summer. Sturgis is confirmed Labor day
__________________
Greg Wackett
Reply With Quote
  #71  
Old 04-17-2011
tennesseemustangperformance tennesseemustangperformance is offline
Senior Saleen Forums Participant
 
Join Date: May 2009
Location: Knoxville, Tennessee
Posts: 931
Default

Quote:
Originally Posted by Coderedsaleen View Post
Yes the airbags does work, well it is hooked up...

With a little cutting and welding it will fit. I took my old wheel and had the brass insert welded into the new one after cutting the long hex stem off. I wish I would have taken pics.

So I take it the wheel is aluminum and not magnesium then... good to know.
Which brass insert are you talking about, by the way? I scored a premium 2011 wheel earlier tonight, and would love to install it in my 1998. Did you wire up the switches as well?
Reply With Quote
  #72  
Old 04-19-2011
Coderedsaleen Coderedsaleen is offline
SOEC Member
 
Join Date: Jan 2010
Location: Virginia
Posts: 1,472
Default

The brass insert is in the old 99-04 wheel, I had it cut out of the an old one then the new wheel was modded to accept the brass insert. Yes the wires are wired up for the cruise.
Reply With Quote
  #73  
Old 04-19-2011
00_ExtrmRnbw 00_ExtrmRnbw is offline
SOEC Member
 
Join Date: Feb 2011
Location: Richmond, VA
Posts: 645
Default

My first time seeing your pictures and what a beautiful car you have there!!
__________________
Johnny

'00 Saleen SC Spdstr, Extreme Rainbow #387
'02 Saleen Extreme Coupe, Extreme Rainbow #019
'03 Saleen SA-20 Anniversary Speedster #03
Reply With Quote
  #74  
Old 04-19-2011
Coderedsaleen Coderedsaleen is offline
SOEC Member
 
Join Date: Jan 2010
Location: Virginia
Posts: 1,472
Default

Thanks for the compliment!!
Reply With Quote
  #75  
Old 04-19-2011
tennesseemustangperformance tennesseemustangperformance is offline
Senior Saleen Forums Participant
 
Join Date: May 2009
Location: Knoxville, Tennessee
Posts: 931
Default

Quote:
Originally Posted by Coderedsaleen View Post
The brass insert is in the old 99-04 wheel, I had it cut out of the an old one then the new wheel was modded to accept the brass insert. Yes the wires are wired up for the cruise.
Very cool, thanks for the info! I can't wait to install my 2011 wheel soon, have been wanting to do this wheel swap since the 2005 came out.
Reply With Quote
  #76  
Old 05-15-2011
Coderedsaleen Coderedsaleen is offline
SOEC Member
 
Join Date: Jan 2010
Location: Virginia
Posts: 1,472
Default Installation of my new 335/30/18R tires.

Here are some pics of my new tires, to stay true to the Saleen styling I put on some Perilli PZero Rosso.

Front are 265/35/18R on 18X9 Saleen rim.
Rear are 335/30/18R on a 18X11 Saleen rim.









Hard to see the tape measure but the tire is 13" wide.
Reply With Quote
  #77  
Old 05-15-2011
OneQwkStang's Avatar
OneQwkStang OneQwkStang is offline
Registered User
 
Join Date: May 2011
Location: Ontario, Canada
Posts: 1,270
Default

Real or not, it sure looks sweet. I'd be interested in a trunk mat too.
Reply With Quote
  #78  
Old 05-16-2011
Josh2J's Avatar
Josh2J Josh2J is offline
SOEC Member
 
Join Date: Jan 2010
Location: Morris,IL
Posts: 128
Default

what a ride... great thread! awesome work!
__________________
2002 Saleen S281 # 461
http://i788.photobucket.com/albums/y...hoot035SIG.jpg
V3 Si-Trim Polished Vortech Supercharger, Anderson Blower Cams, Devil's Own Meth Kit, 60lb Injectors, SVT Fuel Pump, NGK Plugs, Diablos MAFia, SCT Chip,
4" AFM Powerpipe, 3:90 Rear Gear, Bassani Headers and O/R X-pipe, BFGoodrich KDW's, H&R SS Springs
DynoJet Tune by Modern Muscle, 460rwh/415 torq @12 psi
Reply With Quote
  #79  
Old 05-16-2011
Coderedsaleen Coderedsaleen is offline
SOEC Member
 
Join Date: Jan 2010
Location: Virginia
Posts: 1,472
Default

Thanks for all the great compliments! Send me a PM if you are interested in getting a decklid mat.
Reply With Quote
  #80  
Old 05-16-2011
Rayder_K Rayder_K is offline
Saleen Forums Participant
 
Join Date: Jan 2010
Location: Stockton, California
Posts: 71
Default Your Doing The Right Stuff Bro

CoderedSaleen, huh, I think I seen your youtube videos or something, sounds familiar. But hey, those seats covers for saleen, do you mind tell me where you got that done?
Reply With Quote
  #81  
Old 05-16-2011
Coderedsaleen Coderedsaleen is offline
SOEC Member
 
Join Date: Jan 2010
Location: Virginia
Posts: 1,472
Default

Don't have any videos on Youtube that I know of. The seats are from a 03 Cobra but the headrests were done years ago and don't remember where I got them from.
Reply With Quote
  #82  
Old 05-22-2011
Coderedsaleen Coderedsaleen is offline
SOEC Member
 
Join Date: Jan 2010
Location: Virginia
Posts: 1,472
Default

Here is a pic from behind:

Reply With Quote
  #83  
Old 05-22-2011
Coderedsaleen Coderedsaleen is offline
SOEC Member
 
Join Date: Jan 2010
Location: Virginia
Posts: 1,472
Default







Reply With Quote
  #84  
Old 05-22-2011
Coderedsaleen Coderedsaleen is offline
SOEC Member
 
Join Date: Jan 2010
Location: Virginia
Posts: 1,472
Default

Reply With Quote
  #85  
Old 05-24-2011
OxfordS281 OxfordS281 is offline
Senior Saleen Forums Participant
 
Join Date: Jun 2010
Location: Maryland
Posts: 2,308
Default

i love the center exhaust with 3 piece wing. if i would of had more time i would of bought one to go with my 3 piece. instead i went with the E-Wing. i do like the custom graphic you made for shows i assume. very sharp.
Reply With Quote
  #86  
Old 06-10-2011
Coderedsaleen Coderedsaleen is offline
SOEC Member
 
Join Date: Jan 2010
Location: Virginia
Posts: 1,472
Default

Yes I made that spec card to be used at car shows. People are always asking me questions about it.
Reply With Quote
  #87  
Old 06-18-2011
Coderedsaleen Coderedsaleen is offline
SOEC Member
 
Join Date: Jan 2010
Location: Virginia
Posts: 1,472
Default

Reply With Quote
  #88  
Old 07-03-2011
LeftLane_94's Avatar
LeftLane_94 LeftLane_94 is offline
SOEC Member
 
Join Date: Feb 2011
Location: Springfield, MO
Posts: 216
Default

Really great car man. Idk if you still have trunk mats left, but I may be needing one of these from you. I need a new steering wheel in the worst way... was the install hard??
__________________
2003 S281-- 03-0094 Running Strong
1996 S281-- 96-347 Triple Black Vert Automatic--TOTALED
2006 GT--Traded
2001 GT--TOTALED
2001 V6--Sold
Reply With Quote
  #89  
Old 07-03-2011
Coderedsaleen Coderedsaleen is offline
SOEC Member
 
Join Date: Jan 2010
Location: Virginia
Posts: 1,472
Default

Thanks for the compliments! The 05 steering wheel was easy if you can do some cutting and welding, LOL!

PM sent about the trunk mats.
Reply With Quote
  #90  
Old 08-27-2011
Saleen S281 Saleen S281 is offline
Senior Saleen Forums Participant
 
Join Date: Jan 2010
Location: Houston Area, TX
Posts: 318
Default

Awesome ride! I want to do something similar with my 06 s281, with the 5.4 gt500 engine and a Tremec 6spd. Good luck with the 5.0!
Reply With Quote
  #91  
Old 08-31-2011
OxfordS281 OxfordS281 is offline
Senior Saleen Forums Participant
 
Join Date: Jun 2010
Location: Maryland
Posts: 2,308
Default

Quote:
Originally Posted by LeftLane_94 View Post
Really great car man. Idk if you still have trunk mats left, but I may be needing one of these from you. I need a new steering wheel in the worst way... was the install hard??
look up the fr500 wheel or a 10th anniversary wheel, both good replacements
Reply With Quote
  #92  
Old 10-09-2011
Coderedsaleen Coderedsaleen is offline
SOEC Member
 
Join Date: Jan 2010
Location: Virginia
Posts: 1,472
Default

Reply With Quote
  #93  
Old 11-05-2011
Coderedsaleen Coderedsaleen is offline
SOEC Member
 
Join Date: Jan 2010
Location: Virginia
Posts: 1,472
Default

Wild Wheels Weekend 22nd-23rd Oct. at the Va Bch Convention Center 2011





Reply With Quote
  #94  
Old 11-05-2011
Coderedsaleen Coderedsaleen is offline
SOEC Member
 
Join Date: Jan 2010
Location: Virginia
Posts: 1,472
Default

Reply With Quote
  #95  
Old 11-06-2011
OxfordS281 OxfordS281 is offline
Senior Saleen Forums Participant
 
Join Date: Jun 2010
Location: Maryland
Posts: 2,308
Default

dont get me wrong, im sure those seats are comfortable, i hear it all the time from cobra owners, but MAN those seats look so boring in your saleen. the ones that came in the 03/04 look more sportier than them. If i were you id get some custom recaros or something that stands out more, those i will admit they look oem, i just feel the gray suede is so blan.
Reply With Quote
  #96  
Old 11-06-2011
Coderedsaleen Coderedsaleen is offline
SOEC Member
 
Join Date: Jan 2010
Location: Virginia
Posts: 1,472
Default

Quote:
Originally Posted by OxfordS281 View Post
dont get me wrong, im sure those seats are comfortable, i hear it all the time from cobra owners, but MAN those seats look so boring in your saleen. the ones that came in the 03/04 look more sportier than them. If i were you id get some custom recaros or something that stands out more, those i will admit they look oem, i just feel the gray suede is so blan.
Thanks for your thoughts and that is just what they are. I like my seats that is why I put them in there. If I wanted to go with other peoples opinions I would post a thread and asked. I made the car the way I wanted it. Other Cobra owners can change their seats to what ever they want to so they are not "boring or bland", but I will keep mine. To understand your highlighted comment in the above, those seats are from a 03/04 Cobra just in case you didn't know that.

Oh by the way, White is such a boring color. You need to change it to something more stylish like Laser Red, Sonic Blue, Screaming Yellow, Torch Red, or even black. White is the absents of color, just like your comments.

But then again you are entitled to your opinions, Thanks again!!!!

Last edited by Coderedsaleen; 11-06-2011 at 06:33 PM.
Reply With Quote
  #97  
Old 11-06-2011
OxfordS281 OxfordS281 is offline
Senior Saleen Forums Participant
 
Join Date: Jun 2010
Location: Maryland
Posts: 2,308
Default

Quote:
Originally Posted by Coderedsaleen View Post
Thanks for your thoughts and that is just what they are. I like my seats that is why I put them in there. If I wanted to go with other peoples opinions I would post a thread and asked. I made the car the way I wanted it. Other Cobra owners can change their seats to what ever they want to so they are not "boring or bland", but I will keep mine. To understand your highlighted comment in the above, those seats are from a 03/04 Cobra just in case you didn't know that.

Oh by the way, White is such a boring color. You need to change it to something more stylish like Laser Red, Sonic Blue, Screaming Yellow, Touch Red, or even black. White is the absents of color, just like your comments.

But then again you are entitled to your opinions, Thanks again!!!!

Well since this is a saleen forum, and it is the 99-04 section, i was reffering to the 03/04 Saleen seating, the stock ford seats that saleen recovered. Maybe its just because of the headrest, but i like those seats over yours. I will admit the black on black 03/04 cobra seats look sick, as well as the 2003 cobra 10th anniversay seats. I've never heard of "touch red" what year did they make that color?

If you dont wanna hear comments on your car then why did you create your own thread? Everytime someone talks about supercharging their 2V saleen, or increasing horsepower, you post your engine and tell them "no problems here with my motor, or "maybe you should do what i did"... acting like no one has seen your car before, and offering them NO HELP to their actual issue.

BTW: you are welcome.
Reply With Quote
  #98  
Old 11-06-2011
Coderedsaleen Coderedsaleen is offline
SOEC Member
 
Join Date: Jan 2010
Location: Virginia
Posts: 1,472
Default

Quote:
Originally Posted by OxfordS281 View Post
Well since this is a saleen forum, and it is the 99-04 section, i was reffering to the 03/04 Saleen seating, the stock ford seats that saleen recovered. Maybe its just because of the headrest, but i like those seats over yours. I will admit the black on black 03/04 cobra seats look sick, as well as the 2003 cobra 10th anniversay seats. I've never heard of "touch red" what year did they make that color?
In the above you need to do more research because Saleen did not recover OEM seats. The seats were either left OEM or Recaro wrapped in Saleen covers and offered in other years. You need to spell check what you write before you talk about someone else's.

Quote:
Originally Posted by OxfordS281 View Post
If you dont wanna hear comments on your car then why did you create your own thread? Everytime someone talks about supercharging their 2V saleen, or increasing horsepower, you post your engine and tell them "no problems here with my motor, or "maybe you should do what i did"... acting like no one has seen your car before, and offering them NO HELP to their actual issue.

BTW: you are welcome.
I welcome all comments positive and negative. If you don't like how I respond to the comments then don't post any. I don't see you making a thread or posting anything about your car, what you did to it, pics, or anything. You probably don't know how to do anything on it anyways.

I have helped out alot of people on here, more then you know. When I talk about my conversion I am just giving a option that is available and how to do it.

Also I am not going to get into a pi$$ing contest on here with you since it is a waste of my time. Get over it because this is the last time I will respond to your comments.
Reply With Quote
  #99  
Old 11-07-2011
Werecow Werecow is offline
SOEC Member
 
Join Date: Mar 2009
Location: Santa Maria, Ca
Posts: 1,826
Default

Codered love your car. A lot of subtle touches, or would that be torches...lol, without going overboard. Classy. I for one have had tons of help from Codered, amongst others, and his help has been nothing short of spot on. Thanks again...
Reply With Quote
  #100  
Old 11-07-2011
Coderedsaleen Coderedsaleen is offline
SOEC Member
 
Join Date: Jan 2010
Location: Virginia
Posts: 1,472
Default

Werecow - To funny! Your welcome anytime!
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 02:07 AM.


Orders placed through these advertiser links help to support SOEC and this website.

Tire Rack Wheel Clearance

When you buy one Valeo® ULTIMATE™ Wiper Blade from Tire Rack, you'll get one free!

Dunlop $50 Rebate


| SOEC.ORG | ABOUT SOEC | MEMBERSHIP | SHOWROOM | LITERATURE | VEHICLE PRODUCTION | THE SALEEN TRADER | SALEEN AUTOMOTIVE | CONTACT SOEC | SOEC @ FACEBOOK |


All Original Content Copyright © 1991-2021 Saleen Owners and Enthusiasts Club, LLC (SOEC). All Rights Reserved.
SOEC is the official independent, non-profit organization for owners and enthusiasts of vehicles by Steve Saleen and Saleen Automotive, Inc.