|
Register | FAQ | Members List | Calendar | Mark Forums Read |
2007 Saleen/Parnelli Jones Limited Edition Or as Parnelli likes to call them, for "the Parnelli Jones/Saleen Limited Edition." |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Install Tip: Sequential Tail Lights
Just a heads-up to everyone. I got a set of the CDC sequential taillights for my birthday. Tonight, I installed them. Straight forward, EXCEPT that the chrome trim on the PJ's has to be removed from around the taillights. I was not sure what to use to re-install them, so I used a tube of "Welder" brand adhesive and blue painter's tape to hold it together until the glue dried.
|
#2
|
|||
|
|||
Install sequential tail lights
What is the best way to remove chrome tail light molding? Heat gun and patience?
|
#3
|
|||
|
|||
Yes, a little heat and a pry bar.
|
#4
|
|||
|
|||
Hi.Is't easy to remove the buckle or clip in the moldings center?Thanks.Jean.
|
#5
|
|||
|
|||
The chrome trim around the taillights was attached at the Saleen factory using only double-sided molding tape.
|
#6
|
||||
|
||||
Here's a right up where he slotted the tail light mounting holes.
http://saleenforums.soec.org/showthr...ght=sequential Cheers Ross
__________________
2017 GT 350 2013 GB Boss |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|