|
Register | FAQ | Members List | Calendar | Mark Forums Read |
2008-2009 Racecraft Mustang For discussion of the 2008-09 Racecraft 420S Mustang. Owners of the 2007-08 "Sleeper GT" can also find help here. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Q: Racecraft Suspension?
On our racecraft mustang's with the racecraft suspension's how much lower than a stock gt if any are our car's and if they are lower is the rearend centered like it's supposed to be or sould a adj. panhard bar be installed ? Thanks for any info
|
#2
|
||||
|
||||
The Saleen Racecraft springs lower an S197 Mustang roughly 1 1/4".
|
#3
|
|||
|
|||
thanks dave, so how much lower can you go before the stock panhard bar need's to be changed to keep the rear centered.
|
#4
|
||||
|
||||
Saleen Inc installed the adjustable bar as standard equipment on their S281 Extreme model. If you want one, you can use one.
|
#5
|
||||
|
||||
Never heard that Dave. I thought it was only a Watts link that was used to correct the rear geometry on the Extremes.
With the standard Racecraft suspension, you will see about 3/4" offset (my personal experience) to the drivers side at ride height. Using a good adjustable panhard bar or Watts link setup will correct this. The Watts link is much better for an overall handling upgrade but it is way more expensive.
__________________
Michael '07-0449 S281 SC Coupe - 1 of 1 as optioned |
#6
|
||||
|
||||
The 2006-07 S281 Extreme had the adjustable bar. The 2008-09 S302 Extreme had the Gen II Watts-Link.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|