|
Register | FAQ | Members List | Calendar | Mark Forums Read |
1999-2004 Saleen Mustang For the SN-95 New Edge platform. Be sure to specify year, model and equipment if asking for help. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
10" Rear wheels
What is the factory offset nubers for the 10" rear wheels? I am thinking about buying a set of replicas and want to make sure the tires will still fit under.
__________________
2000-0793 265 lph fuel pump Bassani highflow Mid Pipe Kennebell 2.1L intercooled kit with big air intake tube, CAI and 90 mm mass air PA Competition series automatic with 2800 stall and 3.55's 31 spline Diff with Moser axles and Swars axle tube support system Ford Racing Aluminum Drive shaft w/stifflers loop UPR Chrome moly K-Member with A-arms UPR Coilovers on front with Strange Adj Struts 21st century H.E. Fluidyne Radiator 400 RWHP & 415 Ft lbs of torque |
#2
|
||||
|
||||
I put the black chrome from wheel replicas on mine. Before I did, I looked up and compared the numbers. They were very close. After getting them on, I'm looking at wheel spacers to get the original look back. Not much. I just want to bring them out a little more. The originals seemed to have a little wider offset.
Not sure what brand you're looking at though. I just googled the question and found the original numbers somewhere. If you haven't used the "search thread" option here, then try that. I thought I found it on here, but it might have been another site that popped up on google |
#3
|
|||
|
|||
18x10 with a 30mm offset for the stock saleen wheel. CODERED is running some even wider wheels than that. he has 18x11's on his car with 335's. talk about a lot of rubber!
if you're asking about the replicas I have for sale...yes they fit. =)
__________________
07 Porsche 911 Turbo 02 Saleen S/C Speedster 3.73 gears Chicane 66mm Pulley SCT custom tune SVT Focus Fuel Pump 13" Brembo Brakes LFP Heat Exchanger and Supertank TorkTech Intake SVT Cobra single blade TB Chicane Intercooler 42lb injectors 90mm MAF FPRP Aluminum Driveshaft Maximum Motorsports LCA's, Subframes, Torque Arm, Panhard Bar, Steering Shaft, Front Control Arms and Aluminum Rack Bushings MM Coilover kit with caster camber plates |
#4
|
||||
|
||||
Careful with replica 18x9 fronts FYI, I know a guy who bought some and they wouldn't clear his brembos. I know this is about 18x10's just throwing that out there
__________________
1996 #222 1 of 21 in Moonlight Blue 1 of 8 with exact options 3:55's F-Leather 2 Point Chassis Brace 2000 #944 Performance Red 3:08's Chrome wheels, Supercharged, Floormats. 2002 #48 Mineral Gray Extreme |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|