|
Register | FAQ | Members List | Calendar | Mark Forums Read |
1999-2004 Saleen Mustang For the SN-95 New Edge platform. Be sure to specify year, model and equipment if asking for help. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Q: Press Fit Pulley Install for Series II Supercharger?
I am needing your expertise and input. I have an older Eaton M90 supercharger that is part of an original 2001 Saleen mustang. I bought the mustang as a Saleen modified factory product back in 2001. I have changed pulleys a few times using a Chicane version. However this time I am having trouble changing the pulley. The major issue is getting the press fit pulley installed. I have purchased a Metco tool and then a VMP tool. The threaded end piece on the tools are not fitting into the supercharger snout hole. I contacted Metco and they indicated I would have to get a machine shop to fabricate a piece. I talked with VMP and they said their tool would fit but it is the same size thread. Have you ever heard of this issue before?
|
#2
|
|||
|
|||
press on pulley
You can probably go to your local hardware store and have a look at a universal pulley install kit instead of having something made. They can be had for about 20 bucks or so if you think you found what you need. I believe you will be able to find the bit you need and if not you can take it back.
__________________
Jake 95 Mustang GT. 5.0 Convertible (Sold) 02-11E Saleen Convertible |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|