The Saleen Forums at soec.org header image

Go Back   The Saleen Forums at soec.org > Saleen Mustang Discussions > 1999-2004 Saleen Mustang
Register FAQ Members List Calendar Mark Forums Read

1999-2004 Saleen Mustang For the SN-95 New Edge platform. Be sure to specify year, model and equipment if asking for help.

Reply
 
Thread Tools Display Modes
  #1  
Old 10-26-2020
saleen699 saleen699 is offline
Saleen Forums Participant
 
Join Date: Sep 2010
Location: Fort Worth
Posts: 16
Default Idler Pulley

I have the 01-699 Saleen with the MOSALEEN set up. I was replacing the serpentine belt and tensioner and was also looking to replace the right idler pulley down from the supercharger pulley. Mine has a shaft attached to the bearing and the long bolt screws in from the front thru the bearing and shaft. Is there a certain idler pulley part number for that one?
Reply With Quote
  #2  
Old 10-27-2020
DarkStallion DarkStallion is offline
Senior Saleen Forums Participant
 
Join Date: Sep 2005
Location: RSM, CA
Posts: 225
Default idler

For the two smooth idler pulleys, they are just stock. All you have to do is look it up on rockauto or ebay. They run about 35 bucks each. So they are stock pulleys for your year. I recently replaced the two I have. All you have to do is remove belt, unbolt and get a socket and tap out that drive thing. Then put it on the new pulley and re-install. I bought the motorcraft ones and they are identical to what I pulled out. MOTORCRAFT (XR3E19A216BA, XR3Z8678BA) that is what I pulled from rockauto for your 2001. GT right? You can probably source from a local part store that carries OEM parts. They are sold by ford dealer stores on ebay as well. Good luck let us know how this works out.
__________________
Jake 95 Mustang GT. 5.0 Convertible (Sold)
02-11E Saleen Convertible
Reply With Quote
  #3  
Old 10-27-2020
saleen699 saleen699 is offline
Saleen Forums Participant
 
Join Date: Sep 2010
Location: Fort Worth
Posts: 16
Default

Quote:
Originally Posted by DarkStallion View Post
For the two smooth idler pulleys, they are just stock. All you have to do is look it up on rockauto or ebay. They run about 35 bucks each. So they are stock pulleys for your year. I recently replaced the two I have. All you have to do is remove belt, unbolt and get a socket and tap out that drive thing. Then put it on the new pulley and re-install. I bought the motorcraft ones and they are identical to what I pulled out. MOTORCRAFT (XR3E19A216BA, XR3Z8678BA) that is what I pulled from rockauto for your 2001. GT right? You can probably source from a local part store that carries OEM parts. They are sold by ford dealer stores on ebay as well. Good luck let us know how this works out.
Thanks for your input! I will get them as you have confirmed!
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 04:07 PM.


Orders placed through these advertiser links help to support SOEC and this website.

Tire Rack Wheel Clearance

When you buy one Valeo® ULTIMATE™ Wiper Blade from Tire Rack, you'll get one free!

Dunlop $50 Rebate


| SOEC.ORG | ABOUT SOEC | MEMBERSHIP | SHOWROOM | LITERATURE | VEHICLE PRODUCTION | THE SALEEN TRADER | SALEEN AUTOMOTIVE | CONTACT SOEC | SOEC @ FACEBOOK |


All Original Content Copyright © 1991-2021 Saleen Owners and Enthusiasts Club, LLC (SOEC). All Rights Reserved.
SOEC is the official independent, non-profit organization for owners and enthusiasts of vehicles by Steve Saleen and Saleen Automotive, Inc.