|
Register | FAQ | Members List | Calendar | Mark Forums Read |
1999-2004 Saleen Mustang For the SN-95 New Edge platform. Be sure to specify year, model and equipment if asking for help. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Q: Series V Supercharger?
Anyone have a source for one of these? They were used on the Extreme.
|
#2
|
||||
|
||||
The Series V was a Lysholm 2300, no?
|
#3
|
|||
|
|||
|
#4
|
|||
|
|||
Well aware of the jonse. Just forged the motor got a 55mm pulley and she screams. Built my own heat shield so at 9psi she's good for 431 to the wheels. Not looking to spend big bucks just to upgrade my existing series 2. Builder said I'm good to 18psi.
But my sincere thanks Bob |
#5
|
|||
|
|||
series V
If your builder says your 2V is good for 18PSI, yeah go with a 2300. I don't even think my engine is good for 18PSI. Now the question is where are you going to find a series V that is pulled off of an actual E. Tough find if you find one. Maybe those folks have a used one. They are always doing R&D maybe they have one that they can let go for a good deal. I think they are worth a buzz.
__________________
Jake 95 Mustang GT. 5.0 Convertible (Sold) 02-11E Saleen Convertible |
#6
|
|||
|
|||
call them and get the base plate, bov, plenum, snout and core. its your only option. I had two of the extreme take offs and sold them both for 4k+ only 74 original kits out there.....
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|