The Saleen Forums at soec.org header image

Go Back   The Saleen Forums at soec.org > Saleen Mustang Discussions > 2007 Saleen/Parnelli Jones Limited Edition
Register FAQ Members List Calendar Mark Forums Read

2007 Saleen/Parnelli Jones Limited Edition Or as Parnelli likes to call them, for "the Parnelli Jones/Saleen Limited Edition."

Reply
 
Thread Tools Display Modes
  #1  
Old 01-07-2009
JimIII@JDM's Avatar
JimIII@JDM JimIII@JDM is offline
SOEC Member
 
Join Date: Dec 2008
Location: Toms River, NJ
Posts: 403
Default Another Team JDM Super PJ in the works! #39

A few days after i began posting about our first installation of the Saleen Supershaker system on a Parnelli Jones Mustang i got a call from a PJ faithful, Bruce Costa. His attention was caught when he saw what we were doing with our previous customers limited edition Saleen. Bruce had similar goals and knew we could achieve them for him too. So after a few phone calls and emails we arranged to pick up his PJ for him in Rhode Island and have it delivered here to be Supercharged!

Well the PJ showed up yesterday safe and sound delivered by our driver, same day he picked it up from Bruce. We offloaded it in the rain but brought it inside where we wiped it down for a few quick "Before" pictures.

Bruce's PJ is #39 and already has a list of upgrades performed. He is packing 360 RWHP at the tires utilizing a custom tune, C&L cold air kit, and Long Tube headers. We are going to remove the air induction system but still maintain his exhaust. NOTE: The Factory PJ underdrive pulleys will be removed and a stock Ford water pump and Balancer pulley set will be installed. Along with the Supershaker upgrade he is getting 39# injectors for more fueling and colder Autolite HTO spark plugs which we will gap to .030" for Bruce. With the stock 3.875 supercharger pulley (7 psi boost) installed we are expecting to easily make 450+ HP at the tires. However we will be limited to approximatley 450 with out upgrading to a twin fuel pump system.

Here are a few quick pictures of Bruces car "before" ill be keeping everyone informed of his transformation to a Super PJ as soon as we begin work on it!! I think we plan to start tommorow so get ready for it Bruce!









JimIII
__________________
Team JDM, the Saleen Speedlab center!
www.TEAMJDM.com
732-780-0770
Reply With Quote
  #2  
Old 01-07-2009
Bruce's Avatar
Bruce Bruce is offline
Senior Saleen Forums Participant
 
Join Date: Dec 2006
Location: Rhode Island
Posts: 432
Default

Jim, thanks for not leaving it out in the rain. Yesterday I shocked the PJ by putting its paws on snow which it has never seen leave a mind run on. So I don't want to shock it too much.
So far everything is working to plan - Great. Now onward and upward to a SuperPJ!
__________________
'07 Saleen / Parnelli Jones 302SC
Super Shaker PJ #39 (RW 483HP / 464TQ)
'05 Thunderbird - Inca Gold 1 of 82
'03 Thunderbird - Torch Red
'13 BOSS 302 - School Bus Yellow
with Trackey Option & Seat Delete

Last edited by Bruce; 01-07-2009 at 05:27 PM.
Reply With Quote
  #3  
Old 01-07-2009
tonylop33's Avatar
tonylop33 tonylop33 is offline
SOEC Member
 
Join Date: Jun 2008
Location: Northern California
Posts: 478
Default

Jim,
you need a west coast office!
__________________
Prior Mustangs
2007 Saleen Parnelli Jones #384
1989 Saleen Hatchback #302
1970 Coupe
1968 Shelby GT 350
Reply With Quote
  #4  
Old 01-07-2009
JimIII@JDM's Avatar
JimIII@JDM JimIII@JDM is offline
SOEC Member
 
Join Date: Dec 2008
Location: Toms River, NJ
Posts: 403
Default

Quote:
Originally Posted by tonylop33 View Post
Jim,
you need a west coast office!

Lol i know we do! Ive got some shops out that way we deal with though incase you or anyone else who needs service.

JimIII
__________________
Team JDM, the Saleen Speedlab center!
www.TEAMJDM.com
732-780-0770
Reply With Quote
  #5  
Old 01-07-2009
JimIII@JDM's Avatar
JimIII@JDM JimIII@JDM is offline
SOEC Member
 
Join Date: Dec 2008
Location: Toms River, NJ
Posts: 403
Default

Quote:
Originally Posted by tonylop33 View Post
Jim,
you need a west coast office!

Lol i know we do! Ive got some shops out that way we deal with though incase you or anyone else who needs service.

JimIII
__________________
Team JDM, the Saleen Speedlab center!
www.TEAMJDM.com
732-780-0770
Reply With Quote
  #6  
Old 01-07-2009
USMC0341 USMC0341 is offline
SOEC Member
 
Join Date: Apr 2008
Location: us
Posts: 122
Default

Quote:
Originally Posted by tonylop33 View Post
Jim,
you need a west coast office!
+1!!!!

Congrats Bruce!
Reply With Quote
  #7  
Old 01-09-2009
Richard347 Richard347 is offline
Saleen Forums Participant
 
Join Date: Apr 2008
Location: New York City
Posts: 95
Default

Mine (#181) will be next in line.

Richard
Reply With Quote
  #8  
Old 01-09-2009
Bruce's Avatar
Bruce Bruce is offline
Senior Saleen Forums Participant
 
Join Date: Dec 2006
Location: Rhode Island
Posts: 432
Default

That's Super Richard!
__________________
'07 Saleen / Parnelli Jones 302SC
Super Shaker PJ #39 (RW 483HP / 464TQ)
'05 Thunderbird - Inca Gold 1 of 82
'03 Thunderbird - Torch Red
'13 BOSS 302 - School Bus Yellow
with Trackey Option & Seat Delete
Reply With Quote
  #9  
Old 01-09-2009
JimIII@JDM's Avatar
JimIII@JDM JimIII@JDM is offline
SOEC Member
 
Join Date: Dec 2008
Location: Toms River, NJ
Posts: 403
Default

Quote:
Originally Posted by Richard347 View Post
Mine (#181) will be next in line.

Richard

Ive already got your Supershaker badging in!!
__________________
Team JDM, the Saleen Speedlab center!
www.TEAMJDM.com
732-780-0770
Reply With Quote
  #10  
Old 01-09-2009
PJCanada PJCanada is offline
Saleen Forums Participant
 
Join Date: Dec 2008
Location: White Rock
Posts: 33
Default Western Canada

Any outstanding Saleen performance referals for out here on the uber left coast of Canuckistan??


Quote:
Originally Posted by JimIII@JDM View Post
Lol i know we do! Ive got some shops out that way we deal with though incase you or anyone else who needs service.

JimIII
Reply With Quote
  #11  
Old 01-09-2009
JimIII@JDM's Avatar
JimIII@JDM JimIII@JDM is offline
SOEC Member
 
Join Date: Dec 2008
Location: Toms River, NJ
Posts: 403
Default

Quote:
Originally Posted by PJCanada View Post
Any outstanding Saleen performance referals for out here on the uber left coast of Canuckistan??
My only suggestion would be to head to Washington state maybe to a one of two shops i know. unfortunatley my only Canada contacts are Keywest Ford, Saleen Canada, Da Silva and SHM

Could car haul it down to Troy and do it at Saleen!
__________________
Team JDM, the Saleen Speedlab center!
www.TEAMJDM.com
732-780-0770
Reply With Quote
  #12  
Old 01-10-2009
JimIII@JDM's Avatar
JimIII@JDM JimIII@JDM is offline
SOEC Member
 
Join Date: Dec 2008
Location: Toms River, NJ
Posts: 403
Default

More pics for you Bruce....




Here is Craig our head Saleen technician removing parts getting ready to install the blower...



Front Clip Off to install the heatexchanger and pump



















__________________
Team JDM, the Saleen Speedlab center!
www.TEAMJDM.com
732-780-0770
Reply With Quote
  #13  
Old 01-10-2009
PJCanada PJCanada is offline
Saleen Forums Participant
 
Join Date: Dec 2008
Location: White Rock
Posts: 33
Default Frustrated in Vancouver

Thanks for the heads up re: Saleen referals up here in igloo land. Key West is a Roush dealer and New West is a toilet..lol..much like Walley/Surrey (Surrey girl jokes are world famous and mostly based on true stories), Saleen Canada has a worst reputation here than..hmm..than anyone..and is invisible on the left coast as are the others mentioned from eastern Canada. Other than the Fraser Valley (home to 98% of the performance shops..and vehicles) the rest of the area is so rabidly "eco/evironmental/anti car-truck...unless its the size of a rollerskate and powered by BS..they hate you..we even have anti idling laws aimed to stop anyone from driving trucks and muscle/performance cars. Thats all I have to say about that..lol..thanks again.

Quote:
Originally Posted by JimIII@JDM View Post
My only suggestion would be to head to Washington state maybe to a one of two shops i know. unfortunatley my only Canada contacts are Keywest Ford, Saleen Canada, Da Silva and SHM

Could car haul it down to Troy and do it at Saleen!
Reply With Quote
  #14  
Old 01-10-2009
Bruce's Avatar
Bruce Bruce is offline
Senior Saleen Forums Participant
 
Join Date: Dec 2006
Location: Rhode Island
Posts: 432
Default

Thanks for the pictures Jim. Wow, Love the pictures!

When you have a chance can you tell me how far you got today and what and when will be the steps from here.
__________________
'07 Saleen / Parnelli Jones 302SC
Super Shaker PJ #39 (RW 483HP / 464TQ)
'05 Thunderbird - Inca Gold 1 of 82
'03 Thunderbird - Torch Red
'13 BOSS 302 - School Bus Yellow
with Trackey Option & Seat Delete
Reply With Quote
  #15  
Old 01-10-2009
JimIII@JDM's Avatar
JimIII@JDM JimIII@JDM is offline
SOEC Member
 
Join Date: Dec 2008
Location: Toms River, NJ
Posts: 403
Default

Quote:
Originally Posted by Bruce View Post
Thanks for the pictures Jim. Wow, Love the pictures!

When you have a chance can you tell me how far you got today and what and when will be the steps from here.

Anytime Bruce! it will be done monday morning, we took our time on it today and just about finished everything. the shaker filter box goes on, we have about 1-2 hrs left and they we dyno! We'll be able to deliver monday night or tuesday! Ill see what Jim wants to do for the transport. ill call you monday morning and get some more pics and a dyno video for you!
__________________
Team JDM, the Saleen Speedlab center!
www.TEAMJDM.com
732-780-0770
Reply With Quote
  #16  
Old 01-10-2009
boomstick33 boomstick33 is offline
Account with Invalid Email
 
Join Date: Jan 2009
Location: Hermitage, PA
Posts: 43
Default

Hmmmm....after seeing those pics, now I'm reconsidering the whole NA setup & going with the Supershaker
__________________
[SIZE=4][COLOR=darkorange][B]2007 Saleen Parnelli Jones Super PJ #367[/B][/COLOR][/SIZE]
[B][SIZE=4][COLOR=#ff8c00][/COLOR][/SIZE][/B]
[B][SIZE=3][COLOR=royalblue]1971 Boss 351 Mustang[/COLOR][/SIZE][/B]

[B][SIZE=3][COLOR=red]1970 Corvette Stingray Coupe[/COLOR][/SIZE][/B]
[B][SIZE=3][COLOR=#ff0000][/COLOR][/SIZE][/B]
[B][SIZE=3][COLOR=royalblue][/COLOR][/SIZE][/B]

[FONT=Comic Sans MS][SIZE=3][COLOR=blue][U]Previous Mustangs:[/U][/COLOR][/SIZE][/FONT]
[FONT=Comic Sans MS][SIZE=3][COLOR=blue]1969 Shelby GT-350[/COLOR][/SIZE][/FONT]
[FONT=Comic Sans MS][SIZE=3][COLOR=blue]1970 Boss 302[/COLOR][/SIZE][/FONT]
[FONT=Comic Sans MS][SIZE=3][COLOR=blue]1971 Mach 1[/COLOR][/SIZE][/FONT]


[URL="http://www.musclecarsforever.com"][SIZE=3]http://www.musclecarsforever.com[/SIZE][/URL]
Reply With Quote
  #17  
Old 01-10-2009
pacettr's Avatar
pacettr pacettr is offline
SOEC Member
 
Join Date: Jun 2007
Location: Yukon, Oklahoma
Posts: 198
Default

Wish I could have a Super PJ thread from Jim...
__________________
07 Saleen Parnelli Jones S-302 #494
1 of 1 With Factory-Installed Scenic Roof
Supershaker, 3.0 Pulley, 60# Injectors, FGT Pumps, Extreme H/E, Kooks LT's + O/R H-pipe, Spydershaft
JDM Tune


89 GT Vert
Too Many Mods to List
Reply With Quote
  #18  
Old 01-10-2009
JimIII@JDM's Avatar
JimIII@JDM JimIII@JDM is offline
SOEC Member
 
Join Date: Dec 2008
Location: Toms River, NJ
Posts: 403
Default

Quote:
Originally Posted by pacettr View Post
Wish I could have a Super PJ thread from Jim...

Bring the car out when the weather breaks for a Dyno tune, we'll do something cool with the car!
__________________
Team JDM, the Saleen Speedlab center!
www.TEAMJDM.com
732-780-0770
Reply With Quote
  #19  
Old 01-10-2009
Bruce's Avatar
Bruce Bruce is offline
Senior Saleen Forums Participant
 
Join Date: Dec 2006
Location: Rhode Island
Posts: 432
Default

Hey Jim, look like someone else on the right coast thinking about converting their PJ into a SuperPJ.
__________________
'07 Saleen / Parnelli Jones 302SC
Super Shaker PJ #39 (RW 483HP / 464TQ)
'05 Thunderbird - Inca Gold 1 of 82
'03 Thunderbird - Torch Red
'13 BOSS 302 - School Bus Yellow
with Trackey Option & Seat Delete
Reply With Quote
  #20  
Old 01-10-2009
JimIII@JDM's Avatar
JimIII@JDM JimIII@JDM is offline
SOEC Member
 
Join Date: Dec 2008
Location: Toms River, NJ
Posts: 403
Default

Quote:
Originally Posted by boomstick33 View Post
Hmmmm....after seeing those pics, now I'm reconsidering the whole NA setup & going with the Supershaker
Ill tell you what, it will be more HP per dollar spent! Im totally for the NA build as its the same setup i have in my car. 400 at the tires with out the weight of a blower on the car is alot of fun! But your going to spend about $4000 on parts plus labor. I can get you a great deal on the blower kit with a tune from us. Just call me up! It does come with 39lb injectors, just to think about since you wanted to order them.
__________________
Team JDM, the Saleen Speedlab center!
www.TEAMJDM.com
732-780-0770
Reply With Quote
  #21  
Old 01-10-2009
JimIII@JDM's Avatar
JimIII@JDM JimIII@JDM is offline
SOEC Member
 
Join Date: Dec 2008
Location: Toms River, NJ
Posts: 403
Default

Quote:
Originally Posted by Bruce View Post
Hey Jim, look like someone else on the right coast thinking about converting their PJ into a SuperPJ.
its what all the cool kids are doing
__________________
Team JDM, the Saleen Speedlab center!
www.TEAMJDM.com
732-780-0770
Reply With Quote
  #22  
Old 01-12-2009
JimIII@JDM's Avatar
JimIII@JDM JimIII@JDM is offline
SOEC Member
 
Join Date: Dec 2008
Location: Toms River, NJ
Posts: 403
Default

more pics!!! The car should be done today. We are just waiting to get some stainless steel thin wall tubing in to make some new PCV lines for the blower kit. Saleen sends some rubber lines that over time see alot of oil vapor and heat and become very soft. Under boost these rubber lines will collapse and create a PCV oiling problem within the engine. We are making these lines S/S so they are impossible to collapse! Just one of the little things we do for better fittment.

After this we Dyno!! and Bruce should be Shakin' and Bakin' his tires in no time!!!

JimIII

With the lid off the shaker


lid back on...








__________________
Team JDM, the Saleen Speedlab center!
www.TEAMJDM.com
732-780-0770
Reply With Quote
  #23  
Old 01-12-2009
pacettr's Avatar
pacettr pacettr is offline
SOEC Member
 
Join Date: Jun 2007
Location: Yukon, Oklahoma
Posts: 198
Default

Jim, can you get a close-up of the vacuum routing on the driver's side? Not sure if mine needs the "upgrade" or not. What should I look for?
__________________
07 Saleen Parnelli Jones S-302 #494
1 of 1 With Factory-Installed Scenic Roof
Supershaker, 3.0 Pulley, 60# Injectors, FGT Pumps, Extreme H/E, Kooks LT's + O/R H-pipe, Spydershaft
JDM Tune


89 GT Vert
Too Many Mods to List
Reply With Quote
  #24  
Old 01-12-2009
JimIII@JDM's Avatar
JimIII@JDM JimIII@JDM is offline
SOEC Member
 
Join Date: Dec 2008
Location: Toms River, NJ
Posts: 403
Default

These are pics of the PCV lines we replaced. These lines are normally rubber and with the oil vapors that run through them and engine bay heat makes them get very soft over time and then they will collapse under boost. To prevent this we took thin wall tubing aluminum piping and bent the new tubes to a perfect fit. Then we covered them with some loome and rubber fittings to connect them to each end. Im posting below pics of the driver and passed side with and with out loom.









NOW SHE SITS, ON THE DYNO READY TO ROLL!!!!

__________________
Team JDM, the Saleen Speedlab center!
www.TEAMJDM.com
732-780-0770
Reply With Quote
  #25  
Old 01-12-2009
JimIII@JDM's Avatar
JimIII@JDM JimIII@JDM is offline
SOEC Member
 
Join Date: Dec 2008
Location: Toms River, NJ
Posts: 403
Default

Quote:
Originally Posted by pacettr View Post
Jim, can you get a close-up of the vacuum routing on the driver's side? Not sure if mine needs the "upgrade" or not. What should I look for?
The JDM Vacuum line kit upgrade still needs to be performed. Here is a pic on a regular Saleen SC car. its easier to see this way...
Attached Thumbnails
saleen vac line accuator.jpg  

saleen vac line.jpg  

__________________
Team JDM, the Saleen Speedlab center!
www.TEAMJDM.com
732-780-0770
Reply With Quote
  #26  
Old 01-12-2009
pacettr's Avatar
pacettr pacettr is offline
SOEC Member
 
Join Date: Jun 2007
Location: Yukon, Oklahoma
Posts: 198
Default

So do I just cap or delete the tee in the booster line?
__________________
07 Saleen Parnelli Jones S-302 #494
1 of 1 With Factory-Installed Scenic Roof
Supershaker, 3.0 Pulley, 60# Injectors, FGT Pumps, Extreme H/E, Kooks LT's + O/R H-pipe, Spydershaft
JDM Tune


89 GT Vert
Too Many Mods to List
Reply With Quote
  #27  
Old 01-12-2009
JimIII@JDM's Avatar
JimIII@JDM JimIII@JDM is offline
SOEC Member
 
Join Date: Dec 2008
Location: Toms River, NJ
Posts: 403
Default

Quote:
Originally Posted by pacettr View Post
So do I just cap or delete the tee in the booster line?

The one that runs to the brake booster? You want to remove the t fitting there. You should have enough hose to run it straight to the back of the blower but if its too short after you remove the t get a longer piece from a hardware store. You can cap it but it looks cleaner with just a hose.

JimIII
__________________
Team JDM, the Saleen Speedlab center!
www.TEAMJDM.com
732-780-0770
Reply With Quote
  #28  
Old 01-12-2009
pacettr's Avatar
pacettr pacettr is offline
SOEC Member
 
Join Date: Jun 2007
Location: Yukon, Oklahoma
Posts: 198
Default

Quote:
Originally Posted by JimIII@JDM View Post
The one that runs to the brake booster? You want to remove the t fitting there. You should have enough hose to run it straight but if its too short after you remove the t get a longer piece from a hardware store. You can cap it but it looks cleaner with just a hose.

JimIII
I'll do this and re-check the afr and then get back with you. I'll have my own Super PJ thread yet!!!!
__________________
07 Saleen Parnelli Jones S-302 #494
1 of 1 With Factory-Installed Scenic Roof
Supershaker, 3.0 Pulley, 60# Injectors, FGT Pumps, Extreme H/E, Kooks LT's + O/R H-pipe, Spydershaft
JDM Tune


89 GT Vert
Too Many Mods to List
Reply With Quote
  #29  
Old 01-12-2009
JimIII@JDM's Avatar
JimIII@JDM JimIII@JDM is offline
SOEC Member
 
Join Date: Dec 2008
Location: Toms River, NJ
Posts: 403
Default

Quote:
Originally Posted by pacettr View Post
I'll do this and re-check the afr and then get back with you. I'll have my own Super PJ thread yet!!!!

Hahaha let me know what it does!!
__________________
Team JDM, the Saleen Speedlab center!
www.TEAMJDM.com
732-780-0770
Reply With Quote
  #30  
Old 01-12-2009
JimIII@JDM's Avatar
JimIII@JDM JimIII@JDM is offline
SOEC Member
 
Join Date: Dec 2008
Location: Toms River, NJ
Posts: 403
Default

Some more pics and info from the dyno!!

Well we made the first pull on Bruce's car and everything looked great! We saw 8 max psi boost, about 7-7.5 on the stock 3.875" pulley the entire run. The car made 473 RWHP and 434 Ft/lbs of Torque. However we did max out the stock fuel pump. The car hit its max fuel pump duty cylce at 5800 RPM and started to taylor lean at that point. It never got above a "safe" air fuel ratio but it could have if we continued to a higher RPM. The dyno pull ended at 6200 RPM which we normally go past 6500 and set the limiter to 6800.

I gave Bruce two options at this point. We can leave it where it is, just take some power out and set the rev limiter to 6300 RPM or we could install the GT500 fuel system. The GT500 fuel system will give hime plenty enough fuel and bring the fuel pump duty cycle down under 60%!! This extra fuel keeps the motor safe and from running too lean. Not only are we going to be safe but because of the extra fuel we can now make more power!!

Im thinking with the pulley thats on the car we could see 475-480 RWHP safely with the fuel system installed. Bruce wanted to be right in this ball park so i think we may stay there....unless i can talk him into a pulley for some more boost!!! Again we were only seeing 8 psi at the end of the pull. 10 psi is very safe on these cars and a 3.4 pulley will do that.

Well after Bruce is done tommorow we are picking up Richards PJ in NY on our way back!





JimIII
__________________
Team JDM, the Saleen Speedlab center!
www.TEAMJDM.com
732-780-0770
Reply With Quote
  #31  
Old 01-12-2009
pacettr's Avatar
pacettr pacettr is offline
SOEC Member
 
Join Date: Jun 2007
Location: Yukon, Oklahoma
Posts: 198
Default

Quote:
Originally Posted by JimIII@JDM View Post
Hahaha let me know what it does!!
That was a TOUGH mod. It took, like, 3 or 4 minutes. Definitely more responsive, still "feels" a bit rich. Hope to check the afr tomorrow...





Congrats, Bruce! You will LOVE the power!!! Start saving for a clutch...
__________________
07 Saleen Parnelli Jones S-302 #494
1 of 1 With Factory-Installed Scenic Roof
Supershaker, 3.0 Pulley, 60# Injectors, FGT Pumps, Extreme H/E, Kooks LT's + O/R H-pipe, Spydershaft
JDM Tune


89 GT Vert
Too Many Mods to List
Reply With Quote
  #32  
Old 01-13-2009
JimIII@JDM's Avatar
JimIII@JDM JimIII@JDM is offline
SOEC Member
 
Join Date: Dec 2008
Location: Toms River, NJ
Posts: 403
Default

here is a video i made today, http://www.youtube.com/watch?v=7Y7xU...e=channel_page

Bruce's PJ left here about noon today leaving for Rhode Island in our enclosed carrier. The 302 ended up pushing out 483 RWHP and 464 ftlbs of torque! This is on the stock 3.875 pulley only making 8 psi boost! The supershaker is a really awesome setup and it just goes to show what these things can do with some good know how and tuning!

Thanks Bruce for letting us play with your Car, its been a blast. The car is awesome as it is right now, tons of power to some fun on the street yet still remains fully practical for everyday use. As low mileage as i saw on the car i know it doesnt get driven much but you'll enjoy every second behind the wheel that much more! Have fun and if there is anything else we can ever do please let us know!

JimIII
__________________
Team JDM, the Saleen Speedlab center!
www.TEAMJDM.com
732-780-0770
Reply With Quote
  #33  
Old 01-13-2009
Aussie-Parnelli's Avatar
Aussie-Parnelli Aussie-Parnelli is offline
SOEC Member
 
Join Date: Sep 2008
Location: Australia
Posts: 285
Default

Congratulations Bruce & Jim for an awesome conversion to your #39 PJ.

Jim what would be the cost to put a kit together for me to fit to one of my PJ's here in Australia.

Our dollar is crap to yours at the moment but hopefully will rebound soon.

I have a good dyno tuner here in Australia that looks after my '06 "Saleen
racer"

Regards
Tony Day
Sth Australia
__________________
2008 S302E #02 RHD Saleen Demo/Press
Parnelli Jones #45 Super Shaker RHD
Parnelli Jones #46 Super Shaker RHD
Parnelli Jones #407 Super Shaker RHD (SOLD)
'06 GT Coupe "Saleen Racer" RHD
1970 GT-HO Falcon Phase 2 Owned since new
1966 Shelby GT-350 LHD
1965 TBird Conv. 429SCJ Drag Pak 4 speed
Reply With Quote
  #34  
Old 01-13-2009
pacettr's Avatar
pacettr pacettr is offline
SOEC Member
 
Join Date: Jun 2007
Location: Yukon, Oklahoma
Posts: 198
Default

Jim - can you guide me on the installation of the rear ball stud clips. I don't want this set to break, and I think you mentioned them being "upside-down" in the instructions. Any pics?
__________________
07 Saleen Parnelli Jones S-302 #494
1 of 1 With Factory-Installed Scenic Roof
Supershaker, 3.0 Pulley, 60# Injectors, FGT Pumps, Extreme H/E, Kooks LT's + O/R H-pipe, Spydershaft
JDM Tune


89 GT Vert
Too Many Mods to List
Reply With Quote
  #35  
Old 01-13-2009
JimIII@JDM's Avatar
JimIII@JDM JimIII@JDM is offline
SOEC Member
 
Join Date: Dec 2008
Location: Toms River, NJ
Posts: 403
Default

Quote:
Originally Posted by Aussie-Parnelli View Post
Congratulations Bruce & Jim for an awesome conversion to your #39 PJ.

Jim what would be the cost to put a kit together for me to fit to one of my PJ's here in Australia.

Our dollar is crap to yours at the moment but hopefully will rebound soon.

I have a good dyno tuner here in Australia that looks after my '06 "Saleen
racer"

Regards
Tony Day
Sth Australia


Sure ill pm you some pricing! ive got some really good deals this month actually! If you have a dyno shop to use we can coordinate something via email to make adjustments

Craig Dean is a fellow saleen enthusiast and someone we work with in Australia, dont know where he is in relation to you but something to check out...

http://www.mustangmotorsport.com.au/...s_story_14.php
__________________
Team JDM, the Saleen Speedlab center!
www.TEAMJDM.com
732-780-0770
Reply With Quote
  #36  
Old 01-13-2009
JimIII@JDM's Avatar
JimIII@JDM JimIII@JDM is offline
SOEC Member
 
Join Date: Dec 2008
Location: Toms River, NJ
Posts: 403
Default

Quote:
Originally Posted by pacettr View Post
Jim - can you guide me on the installation of the rear ball stud clips. I don't want this set to break, and I think you mentioned them being "upside-down" in the instructions. Any pics?
Call me tommorow ill get you on the phone with Craig he is the mechanic who has done all our Shaker installs. He can walk you through it for sure. Ill get picks on the next one we have coming in.
__________________
Team JDM, the Saleen Speedlab center!
www.TEAMJDM.com
732-780-0770
Reply With Quote
  #37  
Old 01-13-2009
Bruce's Avatar
Bruce Bruce is offline
Senior Saleen Forums Participant
 
Join Date: Dec 2006
Location: Rhode Island
Posts: 432
Default

Jim delivered the PJ about an hour ago and is now on his way to pick up Richard's PJ in LI NY.
I want to thank the JDM team for taking such good care of my PJ and for providing phone calls, emails, pictures, posts and video of each step. You guys have incredible customer service and top notch technical folks.
I now can't wait for spring!
__________________
'07 Saleen / Parnelli Jones 302SC
Super Shaker PJ #39 (RW 483HP / 464TQ)
'05 Thunderbird - Inca Gold 1 of 82
'03 Thunderbird - Torch Red
'13 BOSS 302 - School Bus Yellow
with Trackey Option & Seat Delete
Reply With Quote
  #38  
Old 01-13-2009
Bruce's Avatar
Bruce Bruce is offline
Senior Saleen Forums Participant
 
Join Date: Dec 2006
Location: Rhode Island
Posts: 432
Default Home Safe and Sound...........

Well the PJ was delivered to its storage garage about an hour ago and is now resting peacefully.
Here some pictures of its return:













I forgot the dyno charts at the garage and will go up and get them this weekend.
__________________
'07 Saleen / Parnelli Jones 302SC
Super Shaker PJ #39 (RW 483HP / 464TQ)
'05 Thunderbird - Inca Gold 1 of 82
'03 Thunderbird - Torch Red
'13 BOSS 302 - School Bus Yellow
with Trackey Option & Seat Delete
Reply With Quote
  #39  
Old 01-13-2009
Dave's Avatar
Dave Dave is offline
Administrator
 
Join Date: Feb 2006
Location: Penn
Posts: 11,909
Default

Congrats Bruce. Looks nice!

Trivia Question: What does the "2008" on the Shaker PJ plate reference?
Reply With Quote
  #40  
Old 01-13-2009
Jim D.'s Avatar
Jim D. Jim D. is offline
Administrator
 
Join Date: Oct 2004
Location: Huntington Beach, CA
Posts: 2,742
Default

I'd like to thank JimIII for taking the time and effort to post photos -- it's been fun watching the progress!

Enjoy, Bruce!
__________________
Email me: jimd@soec(dot)org

Aiding The Addicted™
SOEC Headquarters
Huntington Beach, CA USA

Join Saleen Owners and Enthusiasts Club on Facebook



Meet Steve Saleen at the following Signature Events co-hosted by SOEC:
Reply With Quote
  #41  
Old 01-14-2009
pacettr's Avatar
pacettr pacettr is offline
SOEC Member
 
Join Date: Jun 2007
Location: Yukon, Oklahoma
Posts: 198
Default

Congrats again, Bruce. You will absolutely love the new power...
__________________
07 Saleen Parnelli Jones S-302 #494
1 of 1 With Factory-Installed Scenic Roof
Supershaker, 3.0 Pulley, 60# Injectors, FGT Pumps, Extreme H/E, Kooks LT's + O/R H-pipe, Spydershaft
JDM Tune


89 GT Vert
Too Many Mods to List
Reply With Quote
  #42  
Old 01-14-2009
tonylop33's Avatar
tonylop33 tonylop33 is offline
SOEC Member
 
Join Date: Jun 2008
Location: Northern California
Posts: 478
Default

Quote:
Originally Posted by Dave View Post
Congrats Bruce. Looks nice!

Trivia Question: What does the "2008" on the Shaker PJ plate reference?
The year the shaker kit was released?
__________________
Prior Mustangs
2007 Saleen Parnelli Jones #384
1989 Saleen Hatchback #302
1970 Coupe
1968 Shelby GT 350
Reply With Quote
  #43  
Old 01-17-2009
JimIII@JDM's Avatar
JimIII@JDM JimIII@JDM is offline
SOEC Member
 
Join Date: Dec 2008
Location: Toms River, NJ
Posts: 403
Default

When i posted the video on Youtube, it deleted my music to the video, check out the video now linked off our website...

__________________
Team JDM, the Saleen Speedlab center!
www.TEAMJDM.com
732-780-0770
Reply With Quote
  #44  
Old 01-17-2009
pacettr's Avatar
pacettr pacettr is offline
SOEC Member
 
Join Date: Jun 2007
Location: Yukon, Oklahoma
Posts: 198
Default

Quote:
Originally Posted by JimIII@JDM View Post
When i posted the video on Youtube, it deleted my music to the video, check out the video now linked off our website...
Nice!

Call or shoot me a PM on the PCV setup vs breather...
__________________
07 Saleen Parnelli Jones S-302 #494
1 of 1 With Factory-Installed Scenic Roof
Supershaker, 3.0 Pulley, 60# Injectors, FGT Pumps, Extreme H/E, Kooks LT's + O/R H-pipe, Spydershaft
JDM Tune


89 GT Vert
Too Many Mods to List
Reply With Quote
  #45  
Old 01-17-2009
Bruce's Avatar
Bruce Bruce is offline
Senior Saleen Forums Participant
 
Join Date: Dec 2006
Location: Rhode Island
Posts: 432
Default

Very nice Jim! It is much better with the sound except my heart is still in my mouth everytime the RPMs get up there on the dyno.
I had to add a mod to mark this occasion:

Currently on the PJ:






Soon to be installed on the PJ:


__________________
'07 Saleen / Parnelli Jones 302SC
Super Shaker PJ #39 (RW 483HP / 464TQ)
'05 Thunderbird - Inca Gold 1 of 82
'03 Thunderbird - Torch Red
'13 BOSS 302 - School Bus Yellow
with Trackey Option & Seat Delete
Reply With Quote
  #46  
Old 01-17-2009
pacettr's Avatar
pacettr pacettr is offline
SOEC Member
 
Join Date: Jun 2007
Location: Yukon, Oklahoma
Posts: 198
Default

Nice mod, Bruce...
__________________
07 Saleen Parnelli Jones S-302 #494
1 of 1 With Factory-Installed Scenic Roof
Supershaker, 3.0 Pulley, 60# Injectors, FGT Pumps, Extreme H/E, Kooks LT's + O/R H-pipe, Spydershaft
JDM Tune


89 GT Vert
Too Many Mods to List
Reply With Quote
  #47  
Old 02-13-2009
Dave's Avatar
Dave Dave is offline
Administrator
 
Join Date: Feb 2006
Location: Penn
Posts: 11,909
Default

Quote:
Originally Posted by tonylop33 View Post
The year the shaker kit was released?
Oh, I don't know the answer. I was asking a question. Sounds about right, though.
Reply With Quote
  #48  
Old 02-18-2009
NED@JDM NED@JDM is offline
Saleen Forums Participant
 
Join Date: Feb 2009
Location: Freehold, NJ
Posts: 36
Default

Quote:
Originally Posted by pacettr View Post
Congrats again, Bruce. You will absolutely love the new power...
I will have to agree w/ pacettr!! I am even mulling the idea around on my SpeedLab 01. Decisions. . . decisions. . .

Quote:
Originally Posted by Bruce View Post
Very nice Jim! It is much better with the sound except my heart is still in my mouth everytime the RPMs get up there on the dyno.
I had to add a mod to mark this occasion:

Currently on the PJ:






Soon to be installed on the PJ:


Sweet mod Bruce!! It looks like it worked out well and I am super happy for you!! Look out pavement!!
Reply With Quote
  #49  
Old 02-18-2009
NED@JDM NED@JDM is offline
Saleen Forums Participant
 
Join Date: Feb 2009
Location: Freehold, NJ
Posts: 36
Default

Quote:
Originally Posted by tonylop33 View Post
The year the shaker kit was released?
The original shaker used by Ford or Saleens?
Reply With Quote
  #50  
Old 02-18-2009
tonylop33's Avatar
tonylop33 tonylop33 is offline
SOEC Member
 
Join Date: Jun 2008
Location: Northern California
Posts: 478
Default

Quote:
Originally Posted by tonylop33 View Post
The year the shaker kit was released?
Quote:
Originally Posted by Techco-NS View Post
The original shaker used by Ford or Saleens?
Someone asked what the "2008" on the PJ SuperShaker stands for. I was guessing the year of the Saleen SuperShaker release.
__________________
Prior Mustangs
2007 Saleen Parnelli Jones #384
1989 Saleen Hatchback #302
1970 Coupe
1968 Shelby GT 350
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 09:11 AM.


Orders placed through these advertiser links help to support SOEC and this website.

Tire Rack Wheel Clearance

When you buy one Valeo® ULTIMATE™ Wiper Blade from Tire Rack, you'll get one free!

Dunlop $50 Rebate


| SOEC.ORG | ABOUT SOEC | MEMBERSHIP | SHOWROOM | LITERATURE | VEHICLE PRODUCTION | THE SALEEN TRADER | SALEEN AUTOMOTIVE | CONTACT SOEC | SOEC @ FACEBOOK |


All Original Content Copyright © 1991-2021 Saleen Owners and Enthusiasts Club, LLC (SOEC). All Rights Reserved.
SOEC is the official independent, non-profit organization for owners and enthusiasts of vehicles by Steve Saleen and Saleen Automotive, Inc.